Respiratory

• This supplied-air regulator allows for the smooth flow of supplied air to a 3M Versaflo respirator hood or face shield.
• It includes an integrated whistle that will alert the user when the air pressure drops and features a control knob to allow the individual to adjust it to their own setting if necessary. .

• Disposable cupped dust masks with high performance exhalation valve.
• Soft inner face seal for added protection.
• Wide adjustable straps for comfort.
• Nose clip for adjustment to ensure a good fit.

• Promask2 has an ultra-comfortable T-bar faceseal, which produces an efficient seal with minimal pressure against the face.
• The airflow management system utilises the inner mask to prevent the visor from misting and to ensure CO2 is flushed rapidly and efficiently, reducing wearer fatigue even for long periods of use.
• Promask2 incorporates a wide panoramic visor to maximise the field of vision and a front mounted speech diaphragm for easy communication with colleagues.
• The clear inner mask increases wearer acceptability and presents a user-friendly appearance to others.
• Moulded in grey silicone, Promask2 accepts the Pro2 range of cartridge filters, which have individual covers to maximise working life by protecting the filter media from splashes, sparks and contaminants. Promask2 incorporates a wide panoramic visor to maximise the field of vision and a front mounted speech diaphragm for easy communication with colleagues. The clear inner mask increases wearer acceptability and presents a user friendly appearance to others. Moulded in grey silicone, Promask2 accepts the Pro2 range of cartridge filters, which have individual covers to maximise working life by protecting the filter media from splashes, sparks and contaminants.

3M™ Combination Filter CF32 ABEK2P3 R D DT-4045E provides protection against combined particulates, organic and inorganic gases and vapours, acid gases and vapours, and ammonia and its derivatives. It is designed for use with certain 3M™ tight-fitting respirators in negative pressure mode as well as 3M™ Powered Air Respirator System, PF-600 Series. For effective protection against combined particulates, organic and inorganic gases and vapours, acid gases and vapours, and ammonia and its derivatives, use 3M™ Combination Filter CF32 ABEK2P3 R D DT-4045E. Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode as well as 3M™ Powered Air Respirator System, PF-600 Series. This combination filter protects against gases and vapours from organic compounds with a boiling point above 65 °C, inorganic gases and vapours, and acid gases and vapours. It also protects against ammonia and organic ammonia derivatives, as well as solid and liquid particles, toxic and radioactive particles, micro-organisms (e.g., bacteria and viruses) and enzymes. Note: A2 classifcation in negative pressure mode. A1 classifcation when used with approved powered air systems.

User friendly qualitative face fit testing kit in a portable carry case. Contains all necessary equipment for respirator fit testing, to ensure full respiratory protection. With full training package available including the issue of certificates of competence.

Qualitative Fit Testing (QLFT) requires the use of equipment specified in BS ISO 16975-3 and relies on a wearer''s taste response to a bitter or sweet tasting test solution to determine whether or not a facepiece provides an adequate fit. If QLFT is carried out correctly then any test solution detected by the wearer can be assumed to have come from face seal leakage, indicating a poor fit.

Qualitative Fit Testing (QLFT) requires the use of equipment specified in BS ISO 16975-3 and relies on a wearer''s taste response to a bitter or sweet tasting test solution to determine whether or not a facepiece provides an adequate fit. If QLFT is carried out correctly then any test solution detected by the wearer can be assumed to have come from face seal leakage, indicating a poor fit.

• Lightweight cup-shaped disposable respirator
• Protects against very fine, toxic dusts, fumes, and oil- and water-based mists
• Low-profile exhalation valve lowers breathing resistance and reduces heat build-up
• Pre-formed nose bridge with nose-clip for a secure fit
• Soft inner seal for comfort around the nose
• Latex-free rubber four-point head strap for easy fitting
• Maximum usage level up to 20 times the workplace exposure limit (WEL)

Un-valved Mask Lightweight, cup shaped respirator Features a classic nose clip for a secure fit Soft inner nose seal Continuous Loop Headstrap ensures easy fitting FFP2 NR – Conforms to EN 149:2001+A1:2009

Lightweight, cup-shaped respirator. Four-point headstrap adjustment. Preformed nosebridge removes the need for regular adjustment. Electrostatic filter media. Soft touch elastic. PVC Foam Full Inner Face Seal. Conforms to EN 149:2001+A1:2009. FFP3 NR. Low profile exhalation valve to reduce heat and moisture build-up.

This is a lightweight cup shaped FFP2 respirator / face mask featuring a classic nose clip for a secure fit and a low profile inhalation valve. It has a soft inner nose seal for added comfort and a continuous loop head strap for easy fitting. The 2520V FFP2 mask offers an outstanding level of protection and fit and is suitable for protection against a broad range of particulate hazards.

AerGO® SLIM, LIGHTWEIGHT AND ERGONOMIC RESPIRATOR The most ergonomical and versatile respirator but not only for welding industry. Compatible with both particle and combined filters and thus suitable for a wide range of industrial applications. The slim profile of the unit allows you to squeeze into spaces with limited access, while the smart Flow Control system maintains the air flow constant regardless filter clogging or low battery charge. Audio, visual and vibrating alarm indicate when battery charge or filter replacement is required. Adjustable airflow 160 or 210 lpm available during the whole shift no matter of the type of the filter thanks to the optional Heavy Duty battery.

1 Set of filter cover, spark arrester, pre-filter (2 + 2 + 2 pcs) for AerGO unit.

• The Combined Filter A1B1E1P R SL - OZONE for the powered air purifying respirator CleanAIR AerGO is a spare filter designed to provide comprehensive protection.
• Effectively filtering particles, gases, and vapours of types A, B, E, and OZONE, this spare filter is capable of handling concentrations up to 10 ppm.
• Ensure optimal respiratory safety by incorporating this versatile filter into your CleanAIR AerGO system.

• For CleanAIR AerGO equipment. Li-Ion battery (14.4 V – 2,6 A) removable and rechargeable both attached to the unit or separated from it.
• More than 10 hours of autonomy with a full charge and new P R SL filters.
• Charging time: < 3 hours