Work Place Safety

The bulk of the blade is made from spring steel, which can resist pressure applied from the side without snapping.The safest blade to use is generally a sharp one - as it takes less effort to cut, and therefore greater control can be maintained. This blade stays sharp up to 3 x longer than standard blades. The high-speed steel edge, and heat treated to greater hardness for longer life and edge sharpness.

Robust aluminum body Cutting depth of 20mm Fully automatic blade retraction Safe and easy blade change Lightly rounded handle Soft grip slider accessible from left and right hand

Material: PVC. Strong and high-quality sticky tape with bright eye-catching pattern. Ideal for highlighting hazards and potential dangers. Easy to rip or cut to size. Has a self adhesive backing.

Material: PVC. Strong and high-quality sticky tape with bright eye-catching pattern. Ideal for highlighting hazards and potential dangers. Easy to rip or cut to size. Has a self adhesive backing.

These Faithfull Tailor Shears are manufactured from stainless steel with precision ground blades for accurate cutting.

Heavy duty knife blades designed for making cuts in various materials using your free hand or a guide. Blades are available in standard sizes and will fit most trimming knives.

Available in different colours. The Skipper XS range for indoor environments – can be connected to any indoor surface. The unique XS range allows for connection to any indoor surface, from high gloss and glass, to worktops, shelving, door frames and pillars, making anything possible. The Skipper XS unit has the full 9 metres (30ft) of high-specification fabric tape that’s made Skipper the market leader in retractable barriers. Its three connector points allow it to interface from various angles with its accessories, each of which can hold the XS unit in place and receive its tape end clip, making the range hugely versatile and adaptable to indoor environments.

The Skipper wall & magnetic support brackets are hugely practical accessories for the Skipper unit, and are ideal for situations where using a cone or post is not appropriate. The bracket is available in two versions; a wall version which can be screwed into place for permanent/semi-permanent use, and a non-marking magnetic version which can be attached to vehicles, shelving and other metal surfaces. Once the bracket is in the desired position, the Skipper unit snap-fits onto the bracket and locks into place. The quick release clip prevents the Skipper unit from detaching from the bracket, and is also used to quickly disconnect the unit after use. The support brackets are ideal for logistics, warehousing and facilities management.

The receiver clips act as an end-point for Skipper retractable barriers, and can also be used to support the Skipper waste & safety management accessories. As with the support brackets, the receiver clips are available in both magnetic and non-magnetic variants. (THIS IS THE NON-MAGNETIC RECEIVER) Skipper wall and magnetic receiver clips attach retracting barriers to any surface. Simply pull out the tape from any Skipper or Skipper XS unit and slide it into the receiver clip. This will end the barrier without using additional Skipper units, cones or posts. Waste and safety management products such as recycle bins, safety dispensers and sanitiser brackets can be attached directly to the receiver clip. Wall version requires 4 x screws (not included).

Affixing the Skipper recycle bins and safety dispensers to high gloss and glass surfaces is easily achieved via the Skipper suction pad bracket and suction pad. Simply attach the Skipper suction pad to the desired surface, then slide on the suction pad support bracket. The Skipper recycle bins or safety dispensers then slide into the support bracket. The bracket is not required for lighter items such as the hand sanitiser bracket. The bracket provides the required additional strength to support either a full recycle bin or safety dispenser, without damaging either the suction pad or the chosen surface.

The suction pad holder/receiver can also be used as a receiver clip for the standard Skipper unit, and as a support for the Skipper recycle bins and safety dispensers. Simply position the suction pad onto a glass or high gloss surface and pull down the arm for an extremely strong connection. Receives Skipper tape end clips The Skipper suction pad holder/receiver is designed for use with the Skipper XS unit and can both hold the unit in place and receive its tape end clip.

This A4 sign holder is designed for use with both Skipper and Skipper XS units. The sign holder’s functional design makes it a great complement to the Skipper product range, allowing you to easily display health and safety signs, warnings, promotional messages and directions. Simply insert your A4 message into the polycarbonate sleeve, and slide into the robust u-shaped frame. Twist off the Skipper or Skipper XS unit’s top cap and twist the sign holder into position.

The sanitiser bracket holds standard pump dispensers up to a diameter of 75mm. The bracket is designed for areas where sun screens, sanitisers and other gels and creams are required, such as construction sites, hygienic environments and kitchens. Via the modular Skipper connector slot, the sanitiser bracket can attach easily and securely to other Skipper products including the cord strap clip, suction pad, post & base collar and wall clip – as well as the Skipper unit itself. Does not include sanitiser bottle.

The Skipper safety equipment dispenser provides easy access to Personal Protective Equipment (PPE). PPE equipment such as ear plugs, protective safety glasses, hair nets, shoe covers and more can be safely stored in the Skipper Safety Dispenser. The clear plastic container can also act as a safe area for battery disposal. The safety equipment dispenser can be used in the following ways: As a wall mounted PPE dispenser (via Skipper™ Wall Receiver Clip) Create a free standing safety station by attaching up to 2 Safety Dispensers to the Skipper Post & Base System (via the Post & Base Collar) Attached to magnetic surfaces (Skipper™ Magnetic Cord Strap Clip) Attached to trees, scaffolding, and other posts (Skipper™ Magnetic Cord Strap Clip) Mounted to glass / high-gloss surfaces (Via Skipper™ Suction Pad Bracket & Skipper™ Suction Pad Holder/Receiver) Each safety dispenser is supplied with a selection of stickers to designate its use. The lid is available in a choice of colours to suit your organisation’s branding or to indicate its contents.

The safety cone with a twist. The Skipper road cone is a unique two-piece cone that outperforms its competitors in all areas. The Skipper unit is an optional extra. The Skipper road cone’s patent protected design features an incorporated helix, which deflects wind away and adds to the cone’s stability. The innovative glass bead sleeve has greater reflectivity than prismatic alternatives and is robust and durable, like the whole Skipper range. With a huge spectrum of applications, from airports and traffic control, to industrial and construction operations, the Skipper road cone is creating a revolution worldwide. Conforms to BS EN 13422.

Available in different colours. Make any work area safer with Skipper – the original retractable safety barrier. The Skipper unit can attach to traffic cones, Skipper-branded road cones, and Skipper’s 1m safety posts. You can also attach Skipper directly to walls and magnetic surfaces using a support bracket. The Skipper unit is robust and dependable because of its high-specification materials and fabric tape. The versatile unit is used across a wide range of industries, from construction to airports and shipping, to events, retail, facilities management and many more.

The Skipper recycle bin is a robust and durable attachment for multi-purpose waste and recycling use. The Skipper Recycle Bin is a robust and durable refuse sack holder for multi-purpose waste and recycling use. A choice of colours available. The recycle bin can be used in the following ways: As a wall mounted refuse sack holder (via Skipper™ Wall Receiver Clip) Create a free standing safety station by attaching up to 2 Recycle Bins to the Skipper Post & Base System (via the Post & Base Collar) Attached to magnetic surfaces (Skipper™ Magnetic Cord Strap Clip) Attached to trees, scaffolding, and other posts (Skipper™ Magnetic Cord Strap Clip) Mounted to glass / high-gloss surfaces (Via Skipper™ Suction Pad Bracket & Skipper™ Suction Pad Holder/Receiver) Each recycle bin is supplied with a selection of stickers to designate recycling type. The lid is available in a choice of colours to suit your organisation’s branding or to designate recycling contents. Simply lift the inner ring and attach your plastic bag.

This safety light is a multifunctional, LED system that attaches to Skipper and Skipper XS units. Can be switched between flashing or permanent-on mode, and also has an automatic low-light sensor (can be disabled). Skipper’s Rechargeable Safety Light is compatible with our Cone Toppers & Belt Barriers. The safety light is ideal for traffic control, airports, petrochemicals and many other industries. The unit has a light sensor for automatic activation/deactivation or can be set to full manual control. The bright LEDs can be switched between a flashing or permanent setting, and the unit has an integrated rechargeable battery compartment that is powered by a standard DC adapter (not included). Simply twist off the Skipper or Skipper XS unit’s top cap, and twist on the rechargeable safety light. Conforms to BS3143 part 2 1990. Uses 6 x AA batteries (not included).

Skipper Q post and base system. Truly unique in retractable barriers. The perfect public guidance system that stands out from the crowd Units are supplied with 3-meter tape in either purple, blue, red, green or black or available in combinations. Redefining barrier design the Skipper Q is a contemporary retractable barrier. The Skipper Q uses modern materials for a comprehensive public guidance system that is ideal for hotels, banks, restaurants or events where public safety and style are of premium concern. Weight redistribution in the posts gives the lowest and safest centre of gravity, helping to prevent post tipping and the unit also boosts a slow retraction belt speed. Expand your green credentials with the fully recyclable Skipper Q retractable barrier system. The Skipper Q not only looks good, it’s made from recycled materials and is itself fully recyclable. Our Design team took time to look at retractable barriers systems and examine in detail the very things that as a customer you need. We listened and acted on your words – Sustainability, low impact, green credentials all stood out to inspire us to do better. Skipper Q range. The best system for queue management. Fully recycled. Fully recyclable.

The Post & base collar attaches firmly to the post by simply sliding over the top and seating into position. It provides a strong platform for attaching the Skipper recycle bins, safety dispensers and sanitiser brackets; turning the Skipper post & base system into a fully equipped, free-standing safety & recycling station. After the collar is attached, the Skipper unit can snap-fit to the post as usual, providing a unique combination of a 9m (30ft) barrier and recycling point. A sign holder can also be attached to either the Skipper unit or the post & base cap to display your messages.

Attaches to Skipper Posts and Cones. When a barrier solution is not needed, this cap can give the post & base system a more complete look and also provide an alternate aesthetic. Simply affix the Skipper A4 sign holder to the top to provide an effective signage system. Also can be used with the Skipper road cone.

The Skipper wall & magnetic support brackets are hugely practical accessories for the Skipper unit, and are ideal for situations where using a cone or post is not appropriate. (PLEASE NOTE - THIS IS THE MAGNETIC BRACKET) The bracket is available in two versions; a wall version which can be screwed into place for permanent/semi-permanent use, and a non-marking magnetic version which can be attached to vehicles, shelving and other metal surfaces. Once the bracket is in the desired position, the Skipper unit snap-fits onto the bracket and locks into place. The quick release clip prevents the Skipper unit from detaching from the bracket, and is also used to quickly disconnect the unit after use. The support brackets are ideal for logistics, warehousing and facilities management.

The cord strap clips utilise a robust bungee cord to tourniquet to structures such as pillars, trees and scaffolding. The clip is available in two variants; a non-marking magnetic version which is designed to attach to angular surfaces, and a curved version to fit securely to poles and cylindrical surfaces. Receives Skipper tape end clips and holds Skipper XS unit to create a modular retractable barrier system The cord strap clips are highly practical for indoor and warehouse environments, where they easily connect to shelving and pillars to both hold the Skipper XS unit and receive its tape end clip. PRODUCT CODE: THIS PRODUCT IS K08.CORD01 (Magnetic version) THE OTHER IS K08.CORD02 (Curved version) - SEE SEPARATE PRODUCT PAGE

A dummy unit has the same body as a standard Skipper unit, but contains no tape. The Dummy unit is used to act as a receiver for the Skipper unit’s tape end clip The purpose of a dummy unit is to act as the end point for your safety cordon. A Skipper dummy unit can be used for any cordon that is not a circuit (eg. a straight line). The Skipper unit’s tape end clip can connect to any of the dummy unit’s corresponding slots.

The cord strap clips utilise a robust bungee cord to tourniquet to structures such as pillars, trees and scaffolding. The clip is available in two variants; a non-marking magnetic version which is designed to attach to angular surfaces, and a curved version to fit securely to poles and cylindrical surfaces. Receives Skipper tape end clips and holds Skipper XS unit to create a modular retractable barrier system The cord strap clips are highly practical for indoor and warehouse environments, where they easily connect to shelving and pillars to both hold the Skipper XS unit and receive its tape end clip. THIS PRODUCT CODE: K08.CORD02 (Curved version) THE MAGNETIC VERSION IS AVAILABLE, PLEASE SEE SEPARATE PRODUCT PAGE CODE K08.CORD01 (Magnetic version)

The clamp holder/receiver is used to attach the Skipper XS unit and/or tape end to angular surfaces such as door frames, work surfaces and racking. Attach your Skipper Barrier System using our Skipper clamp holder/receiver. Simply position the clamp in place and turn the screw to tighten. The clamp holder/receiver can be positioned either horizontally or vertically depending on the desired application.

This A4 sign holder is designed for use with both Skipper and Skipper XS units. The sign holder’s functional design makes it a great complement to the Skipper product range, allowing you to easily display health and safety signs, warnings, promotional messages and directions. Simply insert your A4 message into the polycarbonate sleeve, and slide into the robust u-shaped frame. Twist off the Skipper or Skipper XS unit’s top cap and twist the sign holder into position.

Create a 9m wall mounted retractable barrier with this great value kit – from the world’s original and leading retractable tape barrier company – Skipper™. Create a 9m wall mounted retractable barrier with this great value kit – from the world’s original and leading retractable tape barrier company – Skipper™. The kit is ideal for making a cordon in warehouses, across doorways, hallways, isles, elevators, and more. It’s suitable for indoor use where using posts or cones is not appropriate. Simply screw the receiver clips into the desired position. A choice of tape colours/messages are available. If you require custom webbing, please contact us. The Skipper XS unit contains 9m (30') of high visibility fabric tape. Its three connector points allow it to interface from various angles with its accessories.

9m internal barrier kit (suction pads). Creates a 9m barrier.

9m internal barrier kit (cord strap clips). Create 9m safety barriers indoors. Wall Mounted Retractable Barrier (9m) with Magnetic and Wrap Around Fixings to easily attach indoor safety barriers to any wall.

Available in different colours. Easily create a 9m long barrier with this Skipper free standing retractable barrier kit. This retracting barrier kit is a great alternative to a cone – Skipper’s post and base system is easy to assemble and looks professional in any environment – both indoors and outdoors. Skipper is the original retractable tape barrier. Each Skipper unit contains 9m (30') of durable, high visibility fabric tape, and is used by health and safety professionals across the world. The kit is ideal for making a cordon in warehouses, across doorways, hallways, aisles, elevators, and more. A choice of tape colours/messages are available. If you require custom webbing, please contact us.

Easily create a barrier up to 36m long with this Skipper retractable barrier kit. Rapidly create a safe working zone with this Skipper Retractable Safety Barrier System Kit. A great alternative to a cone – Skipper’s post and base system is easy to assemble and looks professional in any environment – both indoors and outdoors, and with each Skipper unit containing 9m (30') of high visibility fabric tape, this kit gives you up to 36m of easy-to-deploy barrier. Add water or sand to the post’s base to increase weight and stability. A choice of colours are available to suit your application or company’s branding. For bespoke tapes, (dependant on quantity) please contact us for more information.

Easily create a barrier up to 36m long with this Skipper retractable cone topper kit featuring Skipper’s unique helix road cone. Create a safe zone with this Skipper retractable cone topper kit. Skipper’s unique road cone has superior reflectivity compared to standard traffic cones, and has improved stability in windy conditions. For bespoke tape designs, (dependant on quantity) please contact us for more information.

Create safe areas with this cone top retractable tape barrier kit from Skipper. In the 36m cone top retractable tape barrier kit, each Skipper unit contains 9m (30') of high visibility fabric tape, giving you up to 36m of easy-to-deploy barrier – ideal for traffic management, events, construction, site safety, crowd control barriers and more. About the traffic cone: Two-part design The top of the cone is made with a flexible compound and the base is 100% tough recycled plastic Easy to carry with hand grip Designed and manufactured in the UK 100% recyclable For bespoke tapes, (dependant on quantity) please contact us for more information.

Easily create a barrier up to 27m long with this Skipper retractable barrier kit. Rapidly create a safe working zone with this Skipper retractable safety barriers kit. A great alternative to a cone – Skipper’s post and base system is easy to assemble and looks professional in any environment – both indoors and outdoors, and with each Skipper unit containing 9m (30') of high visibility fabric tape, this kit gives you up to 27m of easy-to-deploy barrier. Add water or sand to the post’s base to increase weight and stability. A choice of colours are available to suit your application or company’s branding. For bespoke tapes, (dependant on quantity) please contact us for more information. Please note: This kit is designed to create a continuous line barrier. If you need the barrier to close back on itself (eg. in a square shape), please use K08.KIT05

Easily create a barrier up to 27m long with this Skipper retractable cone topper kit featuring Skipper’s unique helix road cone and safety lights. Create a safe zone with this Skipper retractable cone topper kit. Skipper’s unique road cone has superior reflectivity compared to standard traffic cones, and has improved stability in windy conditions. This kit also includes Skipper’s rechargeable safety lights. The safety light is ideal for traffic control, airports, petrochemicals and many other industries. The unit has a light sensor for automatic activation/deactivation, or can be set to full manual control. For bespoke tape designs, (dependant on quantity) please contact us for more information.

4 Skipper Twist Cones, 3 Skippers & 1 Dummy Easily create a barrier up to 27m long with this Skipper retractable cone topper kit featuring Skipper’s unique helix road cone. Create a safe zone with this Skipper retractable cone topper kit. Skipper’s unique road cone has superior reflectivity compared to standard traffic cones, and has improved stability in windy conditions. For bespoke tape designs, (dependant on quantity) please contact us for more information.

These Faithfull Sewing Scissors are manufactured from stainless steel with precision ground blades for accurate cutting. Ideal for embroidery, needlecraft work and cutting: textiles, threads, paper, thin card and string.

Office Packaging''s White packing tape is perfect for use in warehouses to identify and colour code packing boxes for stock taking, storage or shipping. Being tough and durable, it offers a tight and secure seal, bonding easily to smooth, clean surfaces.

LONG LEVER. LONG BLADE. LONG-LASTING ENJOYMENT. WITH ROUNDED-TIP TRAPEZOID BLADE. The SECUPRO 625 is at the forefront of our ergonomic squeeze-grip knives. Its aspiration is very clear: premium. Because it offers all that professional users require: an aluminium handle, an easy and smooth lever to release the blade, a large cutting depth combined with a very high safety due to the fully automatic blade retraction and a comfortable blade change. All in all, you will know that you have a high-end cutting tool in your hands.

Designed for all normal cutting jobs Robust aluminium handle cutting depth 19mm Non-slip soft-grip slider for ambidextrous use Tool less blade changing Rounded tip trapezoid double use blade

Efficient squeeze and cut lever Automatic retracted blade, cutting depth 13 mm Will cut up to triple wall cardboard Comfortable for left or right handed use Blade can be turned and used again

MORE LEVERAGE, MORE PERFORMANCE. WITH TRAPEZOID BLADE. The slimline SECUNORM MIZAR is your gateway into our world of quality squeeze-grip knives. Instead of a slider, a lever is responsible for releasing the blade. Squeeze and cut. Thanks to a relatively large cutting depth, you can use this safety knife to cut all common cutting materials. Efficiently. Its slender, no-fuss form, simultaneously allows a wide variety of cutting styles. The handle comprises at least 50% recycled plastic.

Essential tool to protect, mark, fill and seal work involving all kinds of screw securing jobs.