Work Place Safety

Specially designed safety knife to cut shrink wrap and plastic straps with built in tape splitter

Robust film slitter with enclosed Blade and non-slip rubber handle insert. Uses our WBG 202, 3 hole, double-edged razor blades

This 120mm (6") plastic coil that extends to approximately 900mm (36") and comes complete with same trigger hook. These plastic key coils are perfect as an economical key management system with great bulk discounts available.

A versatile backpack with a huge centre compartment and plenty of well-placed pockets, ready for anything!

TRAPEZOID BLADE NO. 65232 from MARTOR is a high-quality blade made of steel. It is very sharp and has two cutting edges that can be used one after the other for a long service life. The deep edge makes cutting easier and the rounded tips increase user safety. The blade is 50.1 mm long, 19 mm wide and 0.63 mm thick. The blade can be used in the following MARTOR knives: SECUNORM MIZAR, SECUNORM MULTISAFE, SECUNORM 300, SECUNORM 500, SECUNORM PROFI, ARGENTAX MULTIPOS.

The SECUPRO MERAK is our practical squeeze-grip safety knife with fully automatic blade retraction. With SECUPRO MARTEGO’s “little brother” we have thought about one thing in particular: you. The lightweight and user friendly SECUPRO MERAK lets you work safely, with little risk of cutting exhaustion. And there’s much more: thanks to a shallow cutting depth, your goods are also well protected. No matter what material you cut.

INDUSTRIAL BLADE NO. 92 from MARTOR is a high-quality blade made of steel. It is very sharp and has four cutting edges that can be used one after the other for an extra long service life. The blade is 26 mm long, 18.5 mm wide and 0.40 mm thick. The blade can be used in the following MARTOR knives: SECUPRO MARTEGO, SECUPRO MERAK, SECUNORM 185.

PROFESSIONAL IN EVERY RESPECT. METAL DETECTABLE. WITH ROUNDED-TIP TRAPEZOID BLADE. Our SECUNORM PROFI25 MDP is aptly named. "PROFI" because this safety knife really does behave professionally. Whatever the situation, whatever the cutting material. The "25" is in reference to its impressive blade extension of 25 mm, with which even 3-ply cardboard can be cut. And finally, the "MDP" tag means that all plastic parts of this knife can be detected by a metal detector.

DOING THE DIRTY WORK. WITH ROUNDED SPECIAL BLADE. The SECUNORM 610 XDR is the first universal bag opener that cuts efficiently AND safely. Use it to open bags of any kind and thickness, and any content. XDR means eXtra Dirt Resistant, i.e., even dusty, liquid or sticky contents won’t stop the safety knife. The blade automatically retracts after cutting on releasing the lever. Users are then also resistant – resistant to cutting injuries.

The SECUNORM 300 is The SECUNORM 500’s “little brother”. Only the handles differ. The SECUNORM 300 handle comprises glass fibre reinforced plastic rather than aluminium, making it lighter. The double-sided slider is ergonomically shaped and has a soft grip for a more comfortable cutting experience. The SECUNORM 300’s cutting depth of 17 mm makes it a real all-rounder, and blade retraction provides you with perfect protection. Automatic blade retraction - for a high user protection Light ergonomic handle - for efficient working Blade change button - for particularly simple and safe blade change (incl. magnet) Practical eyelet - for a secure attachment Double-sided slider (incl. soft grip) - for right and left handers 2-cutting edge blade - for a double period of use 17 mm cutting depth - for all common cutting materials

The SECUMAX COMBI was always in a class of its own as a film cutting expert – until it found its legitimate successor. The new SECUMAX 320 makes an instant impression with its outstanding design. And if you look more closely, you will appreciate its inner values. For example, in comparison to its predecessor, the perfected ergonomics and the completely overhauled blade change. What about the subject of "the highest level of work safety"? It has always been in the COMBI’s DNA – and so it will remain that way. Variable tape splitter - with two splitting dephts Light ergonomic handle (incl. soft grip) - for right and left handers Blade change button - for particularly simple and safe blade change (incl. magnet) Concealed blade - for maximum protection of users and goods Long knife nose - for insertion into the cutting material 4-cutting edge blade - for a particularly long period of use 4 mm cutting depth - especially for film, plastic strapping bands etc.

SECUMAX BLADE NO. 3550 from MARTOR is a high-quality blade head made of steel and plastic. It is very sharp and has two cutting edges that can be used one after the other for a long service life. The blade is 38.9 mm long, 23.86 mm wide and 0.30 mm thick. The blade can be used in the following MARTOR knives: the SECUMAX 350.

The SECUMAX 350 is a combination of versatility, comfort and safety. A maximum degree of safety. Featuring an innovative blade change, this knife is multi-talented. It can be used to cut all standard materials, from film to plastic-strapping, from paper to 2-ply cardboard. It splits adhesive tape easily too. And it is so comfortable to hold that you won''t want to put it down.

PROFESSIONAL IN EVERY RESPECT. METAL DETECTABLE. WITH ROUNDED-TIP TRAPEZOID BLADE. Our SECUNORM PROFI25 MDP is aptly named. "PROFI" because this safety knife really does behave professionally. Whatever the situation, whatever the cutting material. The "25" is in reference to its impressive blade extension of 25 mm, with which even 3-ply cardboard can be cut. And finally, the "MDP" tag means that all plastic parts of this knife can be detected by a metal detector.

For a disposable knife, the SECUMAX 150 fits in a lot of features. Its innovative 3-in-1 cutting head houses two concealed blades, a tape splitter, and a blunt-edged scraper that’s perfect for removing labels and residue. Using both blades allows this safety knife to be used twice as long before being replaced, and the 6mm cutting depth enables it to cut through two-ply cardboard. With concealed blades to protect your fingers, and guide surfaces in front that allow for angled cutting too, this MARTOR safety knife is fantastically versatile.

FULL POINTS IN THREE REGARDS. METAL DETECTABLE. The SECUMAX 150 MDP resolves several issues in one. With its concealed blade, you will never have to worry about injuring yourself or damaging your goods. Thanks to its versatility, you only need the one tool to cut, scrape and split. Main customer benefit: specially designed for sensitive manufacturing processes, the SECUNORM 150 MDP is made of metal detectable plastic to ensure that it is always retrievable.

The MARTOR concealed blade with a maximum degree of safety. The SECUMAX 148 blade is not an open one, but is hidden from people and goods. This provides you with a maximum degree of safety from cut injuries and from damage to goods.The glass fibre reinforcement and the robust, 2-cutting edge blade head ensure longer service lives. This makes SECUMAX 148 ideal for tougher cutting tasks.

The SECUMAX 145 is our clever, compact safety knife for routine cutting tasks – also available in an MDP version. The metal-detectable plastic handle and 0.5 mm strong blade gives a robustness to the lightweight 14 g knife. Its concealed cutting edge easily copes with single-layered cardboard, film and packing tape and keeps your fingers safe. And because the SECUMAX 145 MDP is always traceable, your company is kept safe too.

TRAPEZOID BLADE NO. 60099 from MARTOR is a high-quality blade made of steel. It is very sharp and has two cutting edges that can be used one after the other for a long service life. The blade is 55.5 mm long, 19.0 mm wide and 0.63 mm thick. The deep edge makes cutting easier and the rounded tips increase user safety. The variety of materials that can be processed is immense: up to 3-layer cardboard, rubber, textile, adhesive tape, plastic strapping, leather, wrapping, stretch and shrink fim, bagged goods, PVC flooring, film and paper webs, carpeting, and felt. The blade can be used in the following MARTOR knives: SECUPRO 625, SECUPRO MEGASAFE, SECUPRO MAXISAFE, SECUNORM 525.

INDUSTRIAL BLADE NO. 45 from MARTOR is a high-quality blade made of steel. It is very sharp and has four cutting edges that can be used one after the other for an extra long service life. The blade is 39.0 mm long, 18.5 mm wide and 0.30 mm thick The blade can be used in the following MARTOR knives: SECUMAX EASYSAFE, SECUNORM 175, SECUNORM HANDY.

GRAPHIC BLADE NO. 606 from MARTOR is a high-quality blade made of steel. It is very sharp and has one usable cutting edge. Rounded tips increase user safety. The blade is 31.1 mm long, 5.7 mm wide and 0.50 mm thick. The blade can be used in the following MARTOR knives: GRAFIX 501, TRIMMEX CUTTOGRAF.

REINFORCED RAZOR BLADE NO. 44 from MARTOR is a high-quality blade made of steel. It is very sharp and has one usable cutting edge. The blade is 39.5 mm long, 19.3 mm wide and 0.30 mm thick. The blade can be used in the following MARTOR knives: SCRAPEX ARGENTAX, SCRAPEX CLEANY.

DURABLE AND SHARP The new MARTOR ceramic blade impresses with its long service life and long-lasting sharpness. This makes it easier for you to cut a wide variety of materials. Blade changes are rarely necessary. VERSATILE USABLE In addition to its sharpness, the ceramic blade has special chemical and physical properties. This means your MARTOR safety knife is well equipped, even in special situations. FLEXIBLE AND SAFE You can use the ceramic blade flexibly in existing MARTOR handles – as an alternative to the mounted steel blade. The reliable safety technology of your safety knife protects you when cutting. You will also benefit from its comfort and ergonomics.