Work Place Safety

This safety light is a multifunctional, LED system that attaches to Skipper and Skipper XS units. Can be switched between flashing or permanent-on mode, and also has an automatic low-light sensor (can be disabled). Skipper’s Rechargeable Safety Light is compatible with our Cone Toppers & Belt Barriers. The safety light is ideal for traffic control, airports, petrochemicals and many other industries. The unit has a light sensor for automatic activation/deactivation or can be set to full manual control. The bright LEDs can be switched between a flashing or permanent setting, and the unit has an integrated rechargeable battery compartment that is powered by a standard DC adapter (not included). Simply twist off the Skipper or Skipper XS unit’s top cap, and twist on the rechargeable safety light. Conforms to BS3143 part 2 1990. Uses 6 x AA batteries (not included).

The Skipper recycle bin is a robust and durable attachment for multi-purpose waste and recycling use. The Skipper Recycle Bin is a robust and durable refuse sack holder for multi-purpose waste and recycling use. A choice of colours available. The recycle bin can be used in the following ways: As a wall mounted refuse sack holder (via Skipper™ Wall Receiver Clip) Create a free standing safety station by attaching up to 2 Recycle Bins to the Skipper Post & Base System (via the Post & Base Collar) Attached to magnetic surfaces (Skipper™ Magnetic Cord Strap Clip) Attached to trees, scaffolding, and other posts (Skipper™ Magnetic Cord Strap Clip) Mounted to glass / high-gloss surfaces (Via Skipper™ Suction Pad Bracket & Skipper™ Suction Pad Holder/Receiver) Each recycle bin is supplied with a selection of stickers to designate recycling type. The lid is available in a choice of colours to suit your organisation’s branding or to designate recycling contents. Simply lift the inner ring and attach your plastic bag.

Available in different colours. Make any work area safer with Skipper – the original retractable safety barrier. The Skipper unit can attach to traffic cones, Skipper-branded road cones, and Skipper’s 1m safety posts. You can also attach Skipper directly to walls and magnetic surfaces using a support bracket. The Skipper unit is robust and dependable because of its high-specification materials and fabric tape. The versatile unit is used across a wide range of industries, from construction to airports and shipping, to events, retail, facilities management and many more.

The safety cone with a twist. The Skipper road cone is a unique two-piece cone that outperforms its competitors in all areas. The Skipper unit is an optional extra. The Skipper road cone’s patent protected design features an incorporated helix, which deflects wind away and adds to the cone’s stability. The innovative glass bead sleeve has greater reflectivity than prismatic alternatives and is robust and durable, like the whole Skipper range. With a huge spectrum of applications, from airports and traffic control, to industrial and construction operations, the Skipper road cone is creating a revolution worldwide. Conforms to BS EN 13422.

The Skipper safety equipment dispenser provides easy access to Personal Protective Equipment (PPE). PPE equipment such as ear plugs, protective safety glasses, hair nets, shoe covers and more can be safely stored in the Skipper Safety Dispenser. The clear plastic container can also act as a safe area for battery disposal. The safety equipment dispenser can be used in the following ways: As a wall mounted PPE dispenser (via Skipper™ Wall Receiver Clip) Create a free standing safety station by attaching up to 2 Safety Dispensers to the Skipper Post & Base System (via the Post & Base Collar) Attached to magnetic surfaces (Skipper™ Magnetic Cord Strap Clip) Attached to trees, scaffolding, and other posts (Skipper™ Magnetic Cord Strap Clip) Mounted to glass / high-gloss surfaces (Via Skipper™ Suction Pad Bracket & Skipper™ Suction Pad Holder/Receiver) Each safety dispenser is supplied with a selection of stickers to designate its use. The lid is available in a choice of colours to suit your organisation’s branding or to indicate its contents.

The sanitiser bracket holds standard pump dispensers up to a diameter of 75mm. The bracket is designed for areas where sun screens, sanitisers and other gels and creams are required, such as construction sites, hygienic environments and kitchens. Via the modular Skipper connector slot, the sanitiser bracket can attach easily and securely to other Skipper products including the cord strap clip, suction pad, post & base collar and wall clip – as well as the Skipper unit itself. Does not include sanitiser bottle.

This A4 sign holder is designed for use with both Skipper and Skipper XS units. The sign holder’s functional design makes it a great complement to the Skipper product range, allowing you to easily display health and safety signs, warnings, promotional messages and directions. Simply insert your A4 message into the polycarbonate sleeve, and slide into the robust u-shaped frame. Twist off the Skipper or Skipper XS unit’s top cap and twist the sign holder into position.

The suction pad holder/receiver can also be used as a receiver clip for the standard Skipper unit, and as a support for the Skipper recycle bins and safety dispensers. Simply position the suction pad onto a glass or high gloss surface and pull down the arm for an extremely strong connection. Receives Skipper tape end clips The Skipper suction pad holder/receiver is designed for use with the Skipper XS unit and can both hold the unit in place and receive its tape end clip.

Affixing the Skipper recycle bins and safety dispensers to high gloss and glass surfaces is easily achieved via the Skipper suction pad bracket and suction pad. Simply attach the Skipper suction pad to the desired surface, then slide on the suction pad support bracket. The Skipper recycle bins or safety dispensers then slide into the support bracket. The bracket is not required for lighter items such as the hand sanitiser bracket. The bracket provides the required additional strength to support either a full recycle bin or safety dispenser, without damaging either the suction pad or the chosen surface.

The receiver clips act as an end-point for Skipper retractable barriers, and can also be used to support the Skipper waste & safety management accessories. As with the support brackets, the receiver clips are available in both magnetic and non-magnetic variants. (THIS IS THE NON-MAGNETIC RECEIVER) Skipper wall and magnetic receiver clips attach retracting barriers to any surface. Simply pull out the tape from any Skipper or Skipper XS unit and slide it into the receiver clip. This will end the barrier without using additional Skipper units, cones or posts. Waste and safety management products such as recycle bins, safety dispensers and sanitiser brackets can be attached directly to the receiver clip. Wall version requires 4 x screws (not included).

The Skipper wall & magnetic support brackets are hugely practical accessories for the Skipper unit, and are ideal for situations where using a cone or post is not appropriate. The bracket is available in two versions; a wall version which can be screwed into place for permanent/semi-permanent use, and a non-marking magnetic version which can be attached to vehicles, shelving and other metal surfaces. Once the bracket is in the desired position, the Skipper unit snap-fits onto the bracket and locks into place. The quick release clip prevents the Skipper unit from detaching from the bracket, and is also used to quickly disconnect the unit after use. The support brackets are ideal for logistics, warehousing and facilities management.

Available in different colours. The Skipper XS range for indoor environments – can be connected to any indoor surface. The unique XS range allows for connection to any indoor surface, from high gloss and glass, to worktops, shelving, door frames and pillars, making anything possible. The Skipper XS unit has the full 9 metres (30ft) of high-specification fabric tape that’s made Skipper the market leader in retractable barriers. Its three connector points allow it to interface from various angles with its accessories, each of which can hold the XS unit in place and receive its tape end clip, making the range hugely versatile and adaptable to indoor environments.

Heavy duty knife blades designed for making cuts in various materials using your free hand or a guide. Blades are available in standard sizes and will fit most trimming knives.

These Faithfull Tailor Shears are manufactured from stainless steel with precision ground blades for accurate cutting.

Material: PVC. Strong and high-quality sticky tape with bright eye-catching pattern. Ideal for highlighting hazards and potential dangers. Easy to rip or cut to size. Has a self adhesive backing.

Material: PVC. Strong and high-quality sticky tape with bright eye-catching pattern. Ideal for highlighting hazards and potential dangers. Easy to rip or cut to size. Has a self adhesive backing.

Robust aluminum body Cutting depth of 20mm Fully automatic blade retraction Safe and easy blade change Lightly rounded handle Soft grip slider accessible from left and right hand

The bulk of the blade is made from spring steel, which can resist pressure applied from the side without snapping.The safest blade to use is generally a sharp one - as it takes less effort to cut, and therefore greater control can be maintained. This blade stays sharp up to 3 x longer than standard blades. The high-speed steel edge, and heat treated to greater hardness for longer life and edge sharpness.