Work Place Safety

Affixing the Skipper recycle bins and safety dispensers to high gloss and glass surfaces is easily achieved via the Skipper suction pad bracket and suction pad. Simply attach the Skipper suction pad to the desired surface, then slide on the suction pad support bracket. The Skipper recycle bins or safety dispensers then slide into the support bracket. The bracket is not required for lighter items such as the hand sanitiser bracket. The bracket provides the required additional strength to support either a full recycle bin or safety dispenser, without damaging either the suction pad or the chosen surface.

The sanitiser bracket holds standard pump dispensers up to a diameter of 75mm. The bracket is designed for areas where sun screens, sanitisers and other gels and creams are required, such as construction sites, hygienic environments and kitchens. Via the modular Skipper connector slot, the sanitiser bracket can attach easily and securely to other Skipper products including the cord strap clip, suction pad, post & base collar and wall clip – as well as the Skipper unit itself. Does not include sanitiser bottle.

The cord strap clips utilise a robust bungee cord to tourniquet to structures such as pillars, trees and scaffolding. The clip is available in two variants; a non-marking magnetic version which is designed to attach to angular surfaces, and a curved version to fit securely to poles and cylindrical surfaces. Receives Skipper tape end clips and holds Skipper XS unit to create a modular retractable barrier system The cord strap clips are highly practical for indoor and warehouse environments, where they easily connect to shelving and pillars to both hold the Skipper XS unit and receive its tape end clip. THIS PRODUCT CODE: K08.CORD02 (Curved version) THE MAGNETIC VERSION IS AVAILABLE, PLEASE SEE SEPARATE PRODUCT PAGE CODE K08.CORD01 (Magnetic version)

The Skipper recycle bin is a robust and durable attachment for multi-purpose waste and recycling use. The Skipper Recycle Bin is a robust and durable refuse sack holder for multi-purpose waste and recycling use. A choice of colours available. The recycle bin can be used in the following ways: As a wall mounted refuse sack holder (via Skipper™ Wall Receiver Clip) Create a free standing safety station by attaching up to 2 Recycle Bins to the Skipper Post & Base System (via the Post & Base Collar) Attached to magnetic surfaces (Skipper™ Magnetic Cord Strap Clip) Attached to trees, scaffolding, and other posts (Skipper™ Magnetic Cord Strap Clip) Mounted to glass / high-gloss surfaces (Via Skipper™ Suction Pad Bracket & Skipper™ Suction Pad Holder/Receiver) Each recycle bin is supplied with a selection of stickers to designate recycling type. The lid is available in a choice of colours to suit your organisation’s branding or to designate recycling contents. Simply lift the inner ring and attach your plastic bag.

The clamp holder/receiver is used to attach the Skipper XS unit and/or tape end to angular surfaces such as door frames, work surfaces and racking. Attach your Skipper Barrier System using our Skipper clamp holder/receiver. Simply position the clamp in place and turn the screw to tighten. The clamp holder/receiver can be positioned either horizontally or vertically depending on the desired application.

The cord strap clips utilise a robust bungee cord to tourniquet to structures such as pillars, trees and scaffolding. The clip is available in two variants; a non-marking magnetic version which is designed to attach to angular surfaces, and a curved version to fit securely to poles and cylindrical surfaces. Receives Skipper tape end clips and holds Skipper XS unit to create a modular retractable barrier system The cord strap clips are highly practical for indoor and warehouse environments, where they easily connect to shelving and pillars to both hold the Skipper XS unit and receive its tape end clip. PRODUCT CODE: THIS PRODUCT IS K08.CORD01 (Magnetic version) THE OTHER IS K08.CORD02 (Curved version) - SEE SEPARATE PRODUCT PAGE

Available in different colours. The Skipper XS range for indoor environments – can be connected to any indoor surface. The unique XS range allows for connection to any indoor surface, from high gloss and glass, to worktops, shelving, door frames and pillars, making anything possible. The Skipper XS unit has the full 9 metres (30ft) of high-specification fabric tape that’s made Skipper the market leader in retractable barriers. Its three connector points allow it to interface from various angles with its accessories, each of which can hold the XS unit in place and receive its tape end clip, making the range hugely versatile and adaptable to indoor environments.

The suction pad holder/receiver can also be used as a receiver clip for the standard Skipper unit, and as a support for the Skipper recycle bins and safety dispensers. Simply position the suction pad onto a glass or high gloss surface and pull down the arm for an extremely strong connection. Receives Skipper tape end clips The Skipper suction pad holder/receiver is designed for use with the Skipper XS unit and can both hold the unit in place and receive its tape end clip.

The Skipper wall & magnetic support brackets are hugely practical accessories for the Skipper unit, and are ideal for situations where using a cone or post is not appropriate. (PLEASE NOTE - THIS IS THE MAGNETIC BRACKET) The bracket is available in two versions; a wall version which can be screwed into place for permanent/semi-permanent use, and a non-marking magnetic version which can be attached to vehicles, shelving and other metal surfaces. Once the bracket is in the desired position, the Skipper unit snap-fits onto the bracket and locks into place. The quick release clip prevents the Skipper unit from detaching from the bracket, and is also used to quickly disconnect the unit after use. The support brackets are ideal for logistics, warehousing and facilities management.

The Skipper wall & magnetic support brackets are hugely practical accessories for the Skipper unit, and are ideal for situations where using a cone or post is not appropriate. The bracket is available in two versions; a wall version which can be screwed into place for permanent/semi-permanent use, and a non-marking magnetic version which can be attached to vehicles, shelving and other metal surfaces. Once the bracket is in the desired position, the Skipper unit snap-fits onto the bracket and locks into place. The quick release clip prevents the Skipper unit from detaching from the bracket, and is also used to quickly disconnect the unit after use. The support brackets are ideal for logistics, warehousing and facilities management.

This safety light is a multifunctional, LED system that attaches to Skipper and Skipper XS units. Can be switched between flashing or permanent-on mode, and also has an automatic low-light sensor (can be disabled). Skipper’s Rechargeable Safety Light is compatible with our Cone Toppers & Belt Barriers. The safety light is ideal for traffic control, airports, petrochemicals and many other industries. The unit has a light sensor for automatic activation/deactivation or can be set to full manual control. The bright LEDs can be switched between a flashing or permanent setting, and the unit has an integrated rechargeable battery compartment that is powered by a standard DC adapter (not included). Simply twist off the Skipper or Skipper XS unit’s top cap, and twist on the rechargeable safety light. Conforms to BS3143 part 2 1990. Uses 6 x AA batteries (not included).

The receiver clips act as an end-point for Skipper retractable barriers, and can also be used to support the Skipper waste & safety management accessories. As with the support brackets, the receiver clips are available in both magnetic and non-magnetic variants. (THIS IS THE NON-MAGNETIC RECEIVER) Skipper wall and magnetic receiver clips attach retracting barriers to any surface. Simply pull out the tape from any Skipper or Skipper XS unit and slide it into the receiver clip. This will end the barrier without using additional Skipper units, cones or posts. Waste and safety management products such as recycle bins, safety dispensers and sanitiser brackets can be attached directly to the receiver clip. Wall version requires 4 x screws (not included).