Search
Respiratory
From basic disposable masks right through to the market leading fully powered respirators, you’ll be sure to find the respiratory protection you need in our range.
CleanAIR is our recommended powered air purifying respiratory system. It is based on the principle of overpressure of the filtered air in the breathing zone. The system consists of a powered air respirator which is installed on the wearer’s belt and filtrates the air taken from the surrounding environment through the efficient particle, gas or combined filters. The purified air is delivered through the breathing tube into a protective mask or hood. The overpressure inside the system prevents the hazardous substances from entering the breathing zone. This mild overpressure at the same time ensures the wearer’s comfort, even with long-term use, as the wearer is not forced to overcome the breathing resistance of the filter.
View as
Sort by
Display per page
CleanAIR® Basic pre-filter (pack of 10pcs)
- The Prefilter for the powered air purifying respirator CleanAIR Basic is a crucial component that traps coarse particles, effectively extending the lifespan of the main filter.
- Enhance the longevity and performance of your respiratory protection system with this essential pre-filter.
DeltaPlus Disp. Half-Mask FFP3 with Valve (x5)
- Disposable cupped dust masks with high performance exhalation valve.
- Soft inner face seal for added protection.
- Wide adjustable straps for comfort.
- Nose clip for adjustment to ensure a good fit.
FFP3 Dust-Mist valved Respirators (1x10)
- 3M 8833 FFP3DR valved cup-shaped disposable mask (Pack of 10). Supersoft cushioned inner lining and cleanable sealing ring leave mask hygienic for next use.
- M -Noseclip adjusts easily for fewer pressure points and greater comfort on the nose.
- Cool flow exhalation valve offers improved comfort in hot. Environments or when doing physical work.
- Advanced electret filter material gives effective filtration with high quality low breathing resistance.
- Braided headbands improve comfort on the neck, face and head with a secure feel.
- Durable collapse resistant outer shell for all day comfort and protection.
- The added D in FFP3 = Meets the clogging resistance requirements for fine dust environments. The added R in FFP3 = Reusable, for more than one shift.
- Colour headband for easy identification: Red for FFP3. Conforms to EN149:2001 +A1:2009
3M Versaflo Head Neck and Shoulder Cover
- Head, Neck and Shoulder Cover M-976 for use with M-100 & M-300 Series Helmets.
- Keep wearer''s hair, neck, and collar clean while paint spraying or powder coating with 3M™ Versaflo™ .
- Head, Neck and Shoulder Cover, M-976.
- Our head, neck and shoulder cover is designed to keep the wearer clean and does not provide additional respiratory protection.
3M Versaflo peel off visors (pack of 10)
- Peel-Off Visor Covers M-928 for 3M™ Versaflo™ M-Series Visors. Protect your 3M™ Versaflo™ M-Series Headtop visor from scratches or overspray from paints and chemicals with 3M™ Versaflo™ Peel-Off Visor Cover M-928.
- This transparent visor cover is self-adhesive and can be applied and peeled off easily. You can apply up to five covers at one time, one on top of the other
Bitrex Sensitivity solution 2.5ml
Qualitative Fit Testing (QLFT) requires the use of equipment specified in BS ISO 16975-3 and relies on a wearer''s taste response to a bitter or sweet tasting test solution to determine whether or not a facepiece provides an adequate fit. If QLFT is carried out correctly then any test solution detected by the wearer can be assumed to have come from face seal leakage, indicating a poor fit.
Bitrex Test solution 2.5ml
Qualitative Fit Testing (QLFT) requires the use of equipment specified in BS ISO 16975-3 and relies on a wearer''s taste response to a bitter or sweet tasting test solution to determine whether or not a facepiece provides an adequate fit. If QLFT is carried out correctly then any test solution detected by the wearer can be assumed to have come from face seal leakage, indicating a poor fit.
Bitrex fit test kit complete in Carboard Case
User friendly qualitative face fit testing kit in a portable carry case. Contains all necessary equipment for respirator fit testing, to ensure full respiratory protection. With full training package available including the issue of certificates of competence.
FFP3 foldable Dust-Mist-Fume valved resp (x10)
- 3M 9332+ Aura FFP3D valved flatfold disposable masks (Pack of 10).
- Cool flow exhalation valve offers improved comfort in hot environments or when doing physical work.
- The added D in FFP3 = Meets the clogging resistance requirements for fine dust environments.
- Low breathing resistance filter technology gives effective filtration with consistent high performance.
- Sculpted nose panel conforms to the nose and contours of the face.
- Masks contour helps improve compatibility with safety eyewear
- Innovative chin tab designed for ease of donning and adjustment to help achieve a comfortable fit.
- Flatfold 3 panel design is easy to store and accommodates facial movement for wearer comfort
- Large soft nose foam is comfortable on the skin.
- Colour headband for easy identification: Red for FFP3.
- Conforms to EN149:2001 +A1:2009.
3M Versaflo V500 Regulator with Belt
- This supplied-air regulator allows for the smooth flow of supplied air to a 3M Versaflo respirator hood or face shield.
- It includes an integrated whistle that will alert the user when the air pressure drops and features a control knob to allow the individual to adjust it to their own setting if necessary. .
3M Long Length Breathing Tube
This 3M replacement breathing tube is designed for use with Versaflo respirator face shields and hoods and a Versaflo powered respirator system.
3M Versaflo Flame Resistant Faceseal
This replacement face seal is designed for use with the face shields worn as part of the 3M Versaflo powered respirator system.