Search
Respiratory
From basic disposable masks right through to the market leading fully powered respirators, you’ll be sure to find the respiratory protection you need in our range.
CleanAIR is our recommended powered air purifying respiratory system. It is based on the principle of overpressure of the filtered air in the breathing zone. The system consists of a powered air respirator which is installed on the wearer’s belt and filtrates the air taken from the surrounding environment through the efficient particle, gas or combined filters. The purified air is delivered through the breathing tube into a protective mask or hood. The overpressure inside the system prevents the hazardous substances from entering the breathing zone. This mild overpressure at the same time ensures the wearer’s comfort, even with long-term use, as the wearer is not forced to overcome the breathing resistance of the filter.
View as
Sort by
Display per page
Moldex Easylock Filters (pair) - ABEK1
- Moldex EasyLock® Filters for Series 7000 & 9000 masks.
- No need for additional clips or holders, different gas and particulate filters can be combined.
- EasyLock® particulate filters can either be connected to the EasyLock® gas cartridge or directly to the mask body. adaptors or particulate pre-filters are not necessary.
DeltaPlus Disp. Half-Mask FFP3 with Valve (x5)
- Disposable cupped dust masks with high performance exhalation valve.
- Soft inner face seal for added protection.
- Wide adjustable straps for comfort.
- Nose clip for adjustment to ensure a good fit.
Cup Mask FFP3 Valved (X10)
Lightweight, cup-shaped respirator. Four-point headstrap adjustment. Preformed nosebridge removes the need for regular adjustment. Electrostatic filter media. Soft touch elastic. PVC Foam Full Inner Face Seal. Conforms to EN 149:2001+A1:2009. FFP3 NR. Low profile exhalation valve to reduce heat and moisture build-up.
Bitrex Sensitivity solution 2.5ml
Qualitative Fit Testing (QLFT) requires the use of equipment specified in BS ISO 16975-3 and relies on a wearer''s taste response to a bitter or sweet tasting test solution to determine whether or not a facepiece provides an adequate fit. If QLFT is carried out correctly then any test solution detected by the wearer can be assumed to have come from face seal leakage, indicating a poor fit.
Bitrex Test solution 2.5ml
Qualitative Fit Testing (QLFT) requires the use of equipment specified in BS ISO 16975-3 and relies on a wearer''s taste response to a bitter or sweet tasting test solution to determine whether or not a facepiece provides an adequate fit. If QLFT is carried out correctly then any test solution detected by the wearer can be assumed to have come from face seal leakage, indicating a poor fit.
Moldex Easylock Filters (pair) - A2
- Suitable for Series 7000 and 9000 Masks
- Protects against High-Level organic gases and vapours with boiling point > 65°C - 5000ppm
- EasyLock Bayonet connector
- Can be used alone for gas protection or combined with particulate Filter Cartridges
- Tested and certified to EN 14387:2004+A1:2008
CleanAIR® AerGO Pre-Filter, Spark Arrester, Cover
1 Set of filter cover, spark arrester, pre-filter (2 + 2 + 2 pcs) for AerGO unit.
