Search
Respiratory
From basic disposable masks right through to the market leading fully powered respirators, you’ll be sure to find the respiratory protection you need in our range.
CleanAIR is our recommended powered air purifying respiratory system. It is based on the principle of overpressure of the filtered air in the breathing zone. The system consists of a powered air respirator which is installed on the wearer’s belt and filtrates the air taken from the surrounding environment through the efficient particle, gas or combined filters. The purified air is delivered through the breathing tube into a protective mask or hood. The overpressure inside the system prevents the hazardous substances from entering the breathing zone. This mild overpressure at the same time ensures the wearer’s comfort, even with long-term use, as the wearer is not forced to overcome the breathing resistance of the filter.
View as
Sort by
Display per page
Black twin filter full face Promask2
- Promask2 has an ultra-comfortable T-bar faceseal, which produces an efficient seal with minimal pressure against the face.
- The airflow management system utilises the inner mask to prevent the visor from misting and to ensure CO2 is flushed rapidly and efficiently, reducing wearer fatigue even for long periods of use.
- Promask2 incorporates a wide panoramic visor to maximise the field of vision and a front mounted speech diaphragm for easy communication with colleagues.
- The clear inner mask increases wearer acceptability and presents a user-friendly appearance to others.
- Moulded in grey silicone, Promask2 accepts the Pro2 range of cartridge filters, which have individual covers to maximise working life by protecting the filter media from splashes, sparks and contaminants. Promask2 incorporates a wide panoramic visor to maximise the field of vision and a front mounted speech diaphragm for easy communication with colleagues. The clear inner mask increases wearer acceptability and presents a user friendly appearance to others. Moulded in grey silicone, Promask2 accepts the Pro2 range of cartridge filters, which have individual covers to maximise working life by protecting the filter media from splashes, sparks and contaminants.
FFP3V 2530V Disposable Cup Respirator x 10
- Lightweight cup-shaped disposable respirator
- Protects against very fine, toxic dusts, fumes, and oil- and water-based mists
- Low-profile exhalation valve lowers breathing resistance and reduces heat build-up
- Pre-formed nose bridge with nose-clip for a secure fit
- Soft inner seal for comfort around the nose
- Latex-free rubber four-point head strap for easy fitting
- Maximum usage level up to 20 times the workplace exposure limit (WEL)
Face Mask Non-Sterile Type IIR x 50
- Shelf life: 2 years
- Storage: Protect from sunlight, dust and humidity
- Sterilization: Non- Sterile
- Applied standards: EN 14683:2019, CE class 1
- Product classification: Medical device acc. to MDD 93/42/EEC
3M 501 Filter Retainer pair
- 3M 501 Filter Retainers are an accessory for 3M half and full face respirators. Can be used with 3M 5000 Series filters to add particulate protection to the gas and vapour filters.
- Easy to use – the retainer simply snaps into position over the filter.
- The 3M 501 Filter Retainers are available now at Safety Supplies.
- Call our friendly team today for further details and expert advice on all of your respiratory protection, PPE and workwear needs.
- Used with 3M 5000 Series filters to add particulate protection.
- Can be used with all 3M half and full face mask respirators.
- Snaps into position over the filter.
Moldex Easylock Filters (pair) - P2 R
- Particulate filter with a unique pleated filter, reduces breathing resist
- P3 R D Harmful & carcinogenic dusts, fumes and aerosols
- Particulate filter for 7000 & 9000 Series
- EN143:2000.
CleanAIR® Chemical 2F - Pre-Filters x10 + Keeper
- The Pre-filter for Canister Filters comes in a set of 10 pieces along with a keeper for convenient storage.
- This essential accessory enhances the performance and longevity of canister filters by capturing larger particles before they reach the main filter.
- The pre-filters are designed to improve the overall efficiency of the filtration system, ensuring a cleaner and more durable canister filter.
- With the added convenience of a keeper for organization, this set is a practical solution to maintain optimal respiratory protection.
CleanAIR® Belt Extender 30cm
- To lengthen the CleanAIR comfort/PVC belts by 30 cm.
- Plastic fasteners included.
CleanAIR® Basic pre-filter (pack of 10pcs)
- The Prefilter for the powered air purifying respirator CleanAIR Basic is a crucial component that traps coarse particles, effectively extending the lifespan of the main filter.
- Enhance the longevity and performance of your respiratory protection system with this essential pre-filter.
Moldex Easylock Filters (pair) - P3 R
- Particulate filter with a unique pleated filter, reduces breathing resist
- P3 R D Harmful & carcinogenic dusts, fumes and aerosols
- Particulate filter for 7000 & 9000 Series
- EN143:2000.
CleanAIR® AerGO Pre-Filter, Spark Arrester, Cover
1 Set of filter cover, spark arrester, pre-filter (2 + 2 + 2 pcs) for AerGO unit.
Moldex Easylock Filters (pair) - A2
- Suitable for Series 7000 and 9000 Masks
- Protects against High-Level organic gases and vapours with boiling point > 65°C - 5000ppm
- EasyLock Bayonet connector
- Can be used alone for gas protection or combined with particulate Filter Cartridges
- Tested and certified to EN 14387:2004+A1:2008
Bitrex Sensitivity solution 2.5ml
Qualitative Fit Testing (QLFT) requires the use of equipment specified in BS ISO 16975-3 and relies on a wearer''s taste response to a bitter or sweet tasting test solution to determine whether or not a facepiece provides an adequate fit. If QLFT is carried out correctly then any test solution detected by the wearer can be assumed to have come from face seal leakage, indicating a poor fit.
Bitrex Test solution 2.5ml
Qualitative Fit Testing (QLFT) requires the use of equipment specified in BS ISO 16975-3 and relies on a wearer''s taste response to a bitter or sweet tasting test solution to determine whether or not a facepiece provides an adequate fit. If QLFT is carried out correctly then any test solution detected by the wearer can be assumed to have come from face seal leakage, indicating a poor fit.
Cup Mask FFP3 Valved (X10)
Lightweight, cup-shaped respirator. Four-point headstrap adjustment. Preformed nosebridge removes the need for regular adjustment. Electrostatic filter media. Soft touch elastic. PVC Foam Full Inner Face Seal. Conforms to EN 149:2001+A1:2009. FFP3 NR. Low profile exhalation valve to reduce heat and moisture build-up.
DeltaPlus Disp. Half-Mask FFP3 with Valve (x5)
- Disposable cupped dust masks with high performance exhalation valve.
- Soft inner face seal for added protection.
- Wide adjustable straps for comfort.
- Nose clip for adjustment to ensure a good fit.
Moldex Easylock Filters (pair) - ABEK1
- Moldex EasyLock® Filters for Series 7000 & 9000 masks.
- No need for additional clips or holders, different gas and particulate filters can be combined.
- EasyLock® particulate filters can either be connected to the EasyLock® gas cartridge or directly to the mask body. adaptors or particulate pre-filters are not necessary.
CleanAIR® Chemical 2F - Pre-Filters x50
- The Pre-filter for Canister Filters is available in a pack of 50 pieces, providing an ample supply for prolonged use.
- These pre-filters serve as a crucial component in enhancing the effectiveness of canister filters by capturing larger particles before they reach the main filter.
- Designed for convenience and durability, this pack ensures an extended lifespan for canister filters, contributing to an efficient and reliable respiratory protection system.
- Ideal for professionals requiring a comprehensive solution for sustained usage in various environments.
Moldex Easylock Filters (pair) - AX
- Moldex 9600 AX low boiling point gas and vapour filters.
- Fits all Moldex 7000 series half face masks and 9000 series full face respirators.
- Easylock bayonet connector Tested and certified to EN 14387:2004 + A1:2008
Moldex Easylock Half Mask size Large
- TPE mask body: soft and pleasant to wear. Suitable for most applications.
- Silicon mask body: remains soft and durable even at extreme temperatures.
- Easy maintenance and cleaning without tools.
- With EasyLock® filter system: easy handling.
- No additional adapters or parts necessary.
- Drop down option: mask can be worn around the neck during breaks.
- Tested and certified to EN 140:1998
