Search
Hand Protection
Hands are the most vunerable part of your body.
They’re worth protecting properly.
Many workplace injuries and claims are due to improper hand protection. Choosing the right gloves is a very imprtant job. We offer gloves to protect you in hundres of different working environments. Not just run-of-the-mill gloves, we have a range of specialist gloves for very high risk and demanding applications. You can browse through our range below or ... why not take advantage of our free on-site glove survey? Let us take the risk off you and make your job easier. We assess all your site needs and recommend a selection of gloves for each department. You trial the gloves - let us know what you think and we go from there. This is followed up with staff training and support. Safe hands can save lives.
View as
Sort by
Display per page
18" Kevlar Aramid Sleeve w-Thumb Slot Cut C
- EN388: 2016 level C cut resistance - High tenacity aramid yarn combines high strength and cut resistance into a soft flexible yarn - Double layer construction of aramid for extra protection - Thumb slot cut helps locate the sleeve securely and increases protection to the palm area - The aramid fibre provides heat protection
22" Kevlar Aramid Sleeve w-Thumb Slot Cut C
- EN388: 2016 level C cut resistance - High tenacity aramid yarn combines high strength and cut resistance into a soft flexible yarn - Double layer construction of aramid for extra protection - Thumb slot cut helps locate the sleeve securely and increases protection to the palm area - The aramid fibre provides heat protection
Medium Weight Kevlar Aramid Fibre Glove Cut B
- EN388: 2016 level B cut resistance - High tenacity aramid yarn combines high tensile strength and cut resistance into a soft flexible yarn - This medium weight machine knitted glove with an elasticated wrist made from 100% aramid yarn
Heavy Weight Kevlar Aramid Fibre Glove Cut B
- EN388: 2016 level B cut resistance - High tenacity aramid yarn combines high tensile strength and cut resistance into a soft flexible yarn - Heavyweight machine knitted glove with an elasticated wrist made from 100% aramid yarn
Latex Fully Coated Heavy Duty W-proof Glove Cut E
- EN388: 2016 - level E cut resistance - Textured latex palm offering increased protection, grip and durability - Constructed of a highly specialised mixture of fibres for ultra cut protection - Sanitized hygiene for freshness and odour repellents - Built for extended longevity
Latex Palm Coated Heavy Duty Kevlar Glove Cut E
- EN388: 2016 level E cut resistance - Textured latex palm offering increased protection, grip and durability - Constructed of a highly specialised mixture of fibres for ultra cut protection - Sanitized hygiene for freshness and odour repellents - Built for extended longevity
Tilsatec Ultra-L-wt Foam Nitrile Palm Glove Cut D
- EN388: 2016 level D cut resistance
- Foam nitrile flex palm delivers good dry and oil grip
- Ultra fine 18 gauge lightweight liner
- Rhino Yarn cut resistance technology
- Extremely high level of fingertip sensitivity and tactility
Kevlar Lined Safety Rigger Gloves
Endura Premium Cut-Resistant Fitter with Full Kevlar/Composite Filament Fiber Liner 2850 grams of cut protection.
Tilsatec L-wt Antimicrobial Glove Cut F (singles)
- EN388: 2016 level E cut resistance
- Permanent antimicrobial component
- 10 gauge lightweight gloves
- May be washed at up to 92°C
- Colour coded to prevent cross contamination
- Extended cuff for added protection
- Designed for knife hand use
- Suitable for vegetable preparation, food packaging, light duty meat carving
- Ambidextrous
Tegera 7363 Full Lined Chemical Protec Glove Cut C
- EN388: 2016 level C cut resistance - Fully lined chemical protection glove (0,3 mm *chem-layer) - 18 gg, Glass fibre thread, Spandex, CRF® Technology - Sandy finish - Oil and grease resistant
Heavy Duty Terrycloth Bakers Mitt
- Double thickness cotton terrycloth to the hand for excellent insulation - Extended cuff for added protection to the wrist and forearm - Ambidextrous design for longevity - Withstands contact heat up to 250°C
Mapa KroTech Shock Protect Cushioned Glove Cut D
- EN388: 2016 level D cut resistance - Shock protection, cushioning protection on upper thumb, knuckles, base fingers and palm - Liquid resistant long last coating - Durable, long lasting grease and oilproof palm coating
Tegera 8814 Nitrile Foam-PU Palm Coat Glove Cut F
- EN388: 2016 level F cut resistance - Nitrile foam/waterbased PU, Palm-dipped - 13 gg, Stainless steel fibre yarn, Spandex, CRF® Technology, Basalt fibre thread - Foam grip pattern - Withstands contact heat up to 100°C
Tilsatec 8" Wristguard With Adj Straps Cut F
- Rhino Yarn cut resistant technology
- Protects the wrist and lower arm
- Adjustable sizing for accurate fit and wearer comfort
- Dark colour hides dirt
- Will not mark glass panels
Tegera 987 Nitrile Palm Dipped Long Glove Cut F
- EN388: 2016 level F cut resistance - Nitrile, Palm-dipped - Acrylic, 7 gg, Stainless steel fibre yarn, Spandex - Sandy finish - Water and oil repellent palm - Withstands contact heat up to 250°C - Extra long, for heavy work
Anti Impact Cut 5 Gloves
Combining comfort, grip, impact and cut resistance in a comfortable seamless liner. Flexible PVC impact pods and reinforced crotch for maximum durability. Suitable for heavy duty applications.
Blacktop Knit PU-Leather Palm Glove Cut F
- EN388: 2016 level F cut protection - Optimum cut protection due to the technological weave - Ergonomic knit for excellent dexterity - Strengthened service life with the cow split leather palm - For the handling of ultra highly cutting parts in the glass and metal industry
Enviroflex TDM Cut A PUD Nitrile Foam - Pair
Extreme dexterity with the 18gg featherweight liner. Excellent abrasion resistance. Latex-Free formulation with a heat activates overlocking. Touch screen functionality on the thumb and first two fingers. Oeko-Tex® standard 100 for environmentally friendly textiles. Single-use plastic free - each bundle is packed using recycled cardboard.
Manosun Orange Cut E Nitrile Coated 18 Gauge Glove
- 18 gauge exclusive lining technology contributing it the thinnest cut E glove. - Over 36% lighter than a standard cut E glove. - 10-finger touch screen compatible. - A perfect combination of dexterity, flexibility and comfort. - Super grip in both dry and slightly oily working conditions. - 360° breathability to keep your hands cool while working.
Manosun Oil Res. Cut E 3-4 Coated Glove
- Excellent resistance to industrial oils and greases. - EN ISO 13997 TDM E glove with excellent abrasion resistance. - Excellent flexibility and dexterity minimizing hand fatigue. - The reinforcement greatly extends glove life to save your cost and provides extra protection in the weakest area. - Contact heat protection level 1 approved. - Anti-bacterial processed and OEKO-TEX 100 certified.
Manosun Blue Cut E Nitrile Coated 13 Gauge Glove
- EN ISO 13997 TDM cut level E and ANSI cut level A6 certified. - 10-finger touchscreen compatibility enables you to use all touch screen devices on the job. - Advanced yarns technology contrbutes to high cut protection with extra softness and comfort. - Excellent resistance to oils and acids in dry and wet environments. - Super grip in both dry and oily working conditions. - Ideal for heavy duty work and critical cut/blade hazards. - Anti-bacterial processed and OEKO-TEX standard 100 certified.
Kutlass Foam Nitrile F-Coated W-proof Glove Cut D
- EN388: 2016 level D cut resistance - Fully dipped in a touch waterproof nitrile coating, with a further sandy nitrile porous foam oater coating for extra grip - Knitted from special blend of cut resistant fibres
Kutlass Foam Nitrile Palm Coated Glove Cut D
- EN388: 2016 level D cut resistance - Nitrile foam palm coating providing excellent grip in wet and oily conditions - Knitted foam cut resistant fibres - Anatomically shaped to help reduce hand fatigue
Heat Resistant Silicone Coated Glove +Insert Cut F
- EN388: 2016 level F cut resistance - Silicone coated para-aramid glove - Ergonomic split cow leather water-proofed and oil-proofed reinforcements for protection and longevity - Leather vein patch over the inner wrist - Cuff length of 20cm for extra protection Thermal insulation to 350° for 15 seconds minimum
Pred Green PU Coated Seamless Glove Cut C
- EN388: 2016 level C cut resistance - PU palm coating - Seamless polyester and Azura liner - 13 gauge lightweight glove - Elasticated cuff to better fit - Extremely lightweight and dexterous - Perfect general handling glove where cut protection is required
Kutlass 2 Fingerless Glove Cut B
- EN388: 2016 level B cut resistance
- Specialised HPPE yarn provides good protection and close fitting
- Seamless for added wearer comfort
- Lightweight and breathable for further comfort
- PU coating offers excellent grip
- Open thumb and first 2 fingers
- Sanitized to promote freshness
Tactil RC Knit PU Palm Leather Insert Glove Cut F
- EN388: 2016 level F cut resistance - Optimum cut protection due to the technological weave - Ergonomic knit for excellent dexterity - Abrasion resistant and reinforced longevity with leather inserts - For the handling of very highly cutting parts in the glass and metal industry
Tactil Touch Egonomic Knit Touchscreen Glove Cut F
- EN388: 2016 level F cut resistance - Optimum cut protection due to the technological weave - Ergonomic knit for excellent dexterity - Compatible with touch screens - Excellent abrasion resistance - For the handling of high cutting parts in the glass and metal industry
PU Coated Light Weight Dyneema Glove Cut B
- EN388 level B cut resistance - Smooth PU coating finish for increased abrasion resistance - Palm dipped to increase dexterity and ventilation - 13 gauge lightweight glove - 100% breathable seamless liner - Available in Grey/White
Vecta-12 2 Fingerless ORANGE Glove Cut C
- EN388: 2016 level C cut resistance
- Specialised HPPE yarn provides good protection and close fitting
- Seamless for added wearer comfort
- Lightwight and breathable for further comfort
- PU coating offers excellent grip
- Open thumb and first 2 fingers
- Sanitized to promote freshness
DELTAnocut+ Foam Nitrile Coated Glove Cut D
- EN388:2016 level D cut resistance - Nitrile micro-foam coating on palm and fingertips - Breathable and comfortable glove - 15 gauge lightweight gloves - Soft touch exposure for freshness - Ultra dexterous for reduced hand fatigue
DELTAnocut+ Double Coated Nitrile Glove Cut D
- EN388: 2016 level D cut resistance - Double nitrile coating to work with oil, smooth nitrile, with a second foam nitrile coating for extra grip - 13 gauge lightweight gloves - Increased protection of fingers - Extra coating for extra joint strength
See new code A30.WARM2502D
- EN388: 2016 level E cut resistance - Silicone coated para-aramid / polyamide glove - Para-aramid felt and acrylice / cotton fleece full lining - Total length of 33cm for extended protection - Thermal insulation to 350° for 15 seconds minimum - Water repellent for liquids and hot vapours
Ansell Solvex Nitrile Chemical Resistant Gauntlet
A newly developed nitrile film offers greater strength and superior chemical resistance. Sets new standards for mechanical performance, with unrivalled abrasion resistance and puncture resistance almost twice that of the current leading nitrile - Out-performs all existing nitriles in permeation tests Every glove individually air-pressure tested Length 380 mm
Red PVC Fully Coated Knit-Wrist Waterproof Glove
- White interlock liner - Red fully dipped PVC coating with knitwrist - Suitable for general handling, maintenance, construction, recycling, plumbing and assembly
Red PVC 11" gauntlets
A tough, flexible red PVC coating on a soft interlock lining. The flared cut of the gauntlet eases removal while the gauntlet style provides added protection to the wrist. Overall length is 27cm (11”). Economical multi-purpose glove for general handling in wet or oily conditions. Fully REACH compliant and Phthalate free formulation
Red PVC 14" gauntlets
A tough, flexible red PVC coating on a soft interlock lining. The flared cut of the gauntlet eases removal while the gauntlet style provides added protection to the wrist. Overall length is 27cm (11”). Economical multi-purpose glove for general handling in wet or oily conditions. Fully REACH compliant and Phthalate free formulation.
Red PVC 16" gauntlets
A tough, flexible red PVC coating on a soft interlock lining. The flared cut of the gauntlet eases removal while the gauntlet style provides added protection to the wrist. Overall length is 27cm (11”). Economical multi-purpose glove for general handling in wet or oily conditions. Fully REACH compliant and Phthalate free formulation.
Red PVC 18" gauntlets
A tough, flexible red PVC coating on a soft interlock lining. The flared cut of the gauntlet eases removal while the gauntlet style provides added protection to the wrist. Overall length is 27cm (11”). Economical multi-purpose glove for general handling in wet or oily conditions. Fully REACH compliant and Phthalate free formulation.
Red PVC 22" gauntlets
A tough, flexible red PVC coating on a soft interlock lining. The flared cut of the gauntlet eases removal while the gauntlet style provides added protection to the wrist. Overall length is 27cm (11”). Economical multi-purpose glove for general handling in wet or oily conditions. Fully REACH compliant and Phthalate free formulation.
14"Double Dipped PVC Gauntlets-Green
- Double dipped PVC gauntlet with sandy palm finish for enhanced grip - Jersey lined for extra wearer comfort - CE certified - Chemical resistant gauntlet
BoaFlex Double Dipped and Lined PVC Glove
- Made from specially formulated PVC outer which remains flexible in cold
- Triple dipped non slip glove
- Knitted acrylic/wool lining for warmth
- Soft and flexible cuff
- Chemical Protection
Triple Dipped Chemical Resist PVC Gauntlet
- Premium extra soft PVC gauntlet, resists a wide range of chemicals, specially suitable for use in oil, fats and grease - Hardwearing triple dipped PVC coating remains soft and flexible even in low temperatures - Sand style finish to hand area improves grip performance - Sanitized hygiene function - Fully REACH compliant and Phthalate free formulation
Jolly Molly Thermal Oven Mitt
- Double sided professional oven mitt - Provides excellent thermal insulation
Tegera 6615 Elasticated Leather Glove
- Medium weight full grain cowhide leather glove
- Unlined, 0,7-0,9 mm thickness
- Water and oil repellent
- Elasticated 180°
- For allround work, particularly slippery/oily environments
IceGrip Thermal Protection Glove (Discontinued)
- Provides excellent cold protection - Enhanced dexterity and excellent fit - Palm coating offers a firm grip in both wet and dry enviroments - Extra long elasticated cuff - Breathable thinsulate improves comfort - Cold resistant down to -50°C - Approved for food handling