Search
Hand Protection
Hands are the most vunerable part of your body.
They’re worth protecting properly.
Many workplace injuries and claims are due to improper hand protection. Choosing the right gloves is a very imprtant job. We offer gloves to protect you in hundres of different working environments. Not just run-of-the-mill gloves, we have a range of specialist gloves for very high risk and demanding applications. You can browse through our range below or ... why not take advantage of our free on-site glove survey? Let us take the risk off you and make your job easier. We assess all your site needs and recommend a selection of gloves for each department. You trial the gloves - let us know what you think and we go from there. This is followed up with staff training and support. Safe hands can save lives.
View as
Sort by
Display per page
Watersafe Atlantic latex grip gloves
- 13 gauge, red polyester liner
- Dual latex coating
- Waterproof to the wrist
- Sandy palm for superb wet or dry suction grip
- Knit wrist
Vecta-12 2 Fingerless ORANGE Glove Cut C
- EN388: 2016 level C cut resistance
- Specialised HPPE yarn provides good protection and close fitting
- Seamless for added wearer comfort
- Lightwight and breathable for further comfort
- PU coating offers excellent grip
- Open thumb and first 2 fingers
- Sanitized to promote freshness
Unlined Leather Drivers Glove
- Warmth and protection during a variety of activities including rigging, strapping and vehicle handling.
- Half elastication to back cuff for extra comfortable fit.
Unique Synthetic Vinyl Glove - Clear (1x100)
- Made from a very soft, stretch vinyl which allows for good, tactile sensitivity for all applications.
- Beaded cuff, Ambidextrous, Glueless, Free of Thiurams.
- Straight fingers, Non-Sterile.
Triple Dipped Chemical Resist PVC Gauntlet
- Premium extra soft PVC gauntlet, resists a wide range of chemicals, specially suitable for use in oil, fats and grease - Hardwearing triple dipped PVC coating remains soft and flexible even in low temperatures - Sand style finish to hand area improves grip performance - Sanitized hygiene function - Fully REACH compliant and Phthalate free formulation
Transform 100 Powder Free Nitrile Glove Blue (100)
Excellent quality nitrile examination glove - increased tensile strength and protection over Latex and Vinyl. Thin nitrile for increased comfort, flexibility & sensitivity. 3.2mil Powder-Free Nitrile Non-Sterile Beaded cuff Ambidextrous Latex Free AQL 1.5
Traffiglove X-DURA Cut A, 3 Digit PU Gloves
- High abrasion resistance. Lightweight and ideal for use in dry conditions.
- Features 3 exposed fingers for excellent dexterity.
- Polyurethane coating provides protection to fingertips and palm.
Traffiglove Argile Cut A PU palm coated gloves
- A lightweight glove with a generous cuff length for use in dry conditions.
- The close-fitting design ensures hands can move freely, making it an ideal choice for most general handling tasks.
Tilsatec Ultra-L-wt Foam Nitrile Palm Glove Cut D
- EN388: 2016 level D cut resistance
- Foam nitrile flex palm delivers good dry and oil grip
- Ultra fine 18 gauge lightweight liner
- Rhino Yarn cut resistance technology
- Extremely high level of fingertip sensitivity and tactility
Tilsatec M-wt PU Palm Coated Glove Cut F
- Dry PU palm coating provides secure grip
- 10 gauge medium weight liner
- Rhino Yarn cut resistance technology
- Dark colour liner hides dirt
- Reinforced thumb crotch
Tilsatec M-wt Latex Palm Coated Glove Cut F
- Crinkle latex palm coating delivers excellent dry and wet grip
- 10 gauge medium weight liner
- Breathable open back
- Rhino Yarn cut resistance technology
- Dark colour liner hides dirt
Tilsatec M-wt FR Backed Leather Glove Cut E
- 7 gauge medium duty gloves.
- Rhino Yarn cut resistant technology.
- Level 3 puncture resistance.
- Leather palm provides oil resistance and good grip.
- Flame resistant fabric provides protection from weld spatter to the back of the hand.
Tilsatec M-wt Foam Nitrile Palm Coated Glove Cut F
- Foam nitrile palm coated gloves
- 10 gauge medium weight liner
- Rhino Yarn cut resistance technology
- Breathable open back and coating
- Dark colour liner hides dirt
- Reinforced thumb crotch
Tilsatec L-wt PU Palm Coated Glove Cut E
- These lightweight cut protection gloves are form-fitting for comfort and dexterity. Made from Rhino Yarn™ cut resistant technology with a polyurethane palm coating, these gloves deliver Level 5 cut protection suitable for a wide range of industries.
- Robust and durable palm coating for a high-quality product
- Excellent grip in both wet and dry conditions
- Seam-free construction eliminates skin irritation during prolonged use
- Dark colouring hides dirt to extending the life of the product
Tilsatec L-wt Full Coated Foam Nitrile Glove Cut E
- EN388: 2016 level E cut resistance
- Flat nitrile full dip provides oil repellency and liquid protection keeping the hands dry and comfortable
- 15 gauge form-fitting, lightweight liner
- Rhino Yarn cut resistant technology
- High level of tactility and dexterity
- EN388: 2016 - 3X43E
Tilsatec L-wt FR Backed Leather Palm Glove Cut F
- 13 gauge lightweight gloves
- Lightweight shell provides excellent dexterity and flexibility
- Leather palm provides oil resistance and grip
- Flame resistant fabric provides protection from weld spatter to the back of the hand
- Leather wrist tab provides extended protection and quick pull on action
Tilsatec L-wt Foam Nitrile Palm Coated Glove Cut E
- EN388: 2016 level E cut resistance
- New micropore nitrile palm delivers good dry and oil grip
- 15 gauge form-fitting, lightweight liner
- Rhino Yarn cut resistant technology
- High level of tactility and dexterity
- Breathable liner and palm coating
- EN388: 2016 - 3X43E EN1149-5: 2018
Tilsatec L-wt Antimicrobial Glove Cut F (singles)
- EN388: 2016 level E cut resistance
- Permanent antimicrobial component
- 10 gauge lightweight gloves
- May be washed at up to 92°C
- Colour coded to prevent cross contamination
- Extended cuff for added protection
- Designed for knife hand use
- Suitable for vegetable preparation, food packaging, light duty meat carving
- Ambidextrous
Tilsatec 8" Wristguard c-w straps Cut F (pair)
- Rhino Yarn cut resistant technology
- Protects the wrist and lower arm
- Adjustable sizing for accurate fit and wearer comfort
- Dark colour hides dirt
- Will not mark glass panels
Tegera Synthetic Leather Winter Glove
- Synthetic winter lined glove
- Reinforced index finger and fingertips for longevity
- Windproof and waterproof for extra wearer warmth
Tegera Nitrile Chemical Protection Glove
- Fully lined and dipped chemical protection nitrile glove
- 0,3* mm (*chem-layer) thickness
- Sandy finish palm, superb for resistance to oil/grease/water
- For allround work, suitable for harsh/corrosive/dirty environments
- Suitable for food handling – except for fatty foods
Tegera 987 Nitrile Palm Dipped Long Glove Cut F
- EN388: 2016 level F cut resistance - Nitrile, Palm-dipped - Acrylic, 7 gg, Stainless steel fibre yarn, Spandex - Sandy finish - Water and oil repellent palm - Withstands contact heat up to 250°C - Extra long, for heavy work
Tegera 9128 HVis Touch Screen Synth Leather Glove
- Synthetic winter lined glove
- Diamond grip pattern for ultimate grip
- Hivis backing ideal for outdoor night
- Waterproof for extra wearer warmth
- Elasticated 360° for more secure fit
- Fleece and Thinsulate 40g lining for maximum warmth
- Touch screen fingertip capabilities
Tegera 887 Nitrile-Foam Palm Coated- Diamond Glove
- Palm coated nitrile foam glove
- Breathable back allowing moisture to release for improved comfort
- 13-gauge lightweight glove
- Excellent fingertip sensitivity
- Reinforced diamond grip pattern
- Water and oil repellent palm
Tegera 8814 Nitrile Foam-PU Palm Coat Glove Cut F
- EN388: 2016 level F cut resistance - Nitrile foam/waterbased PU, Palm-dipped - 13 gg, Stainless steel fibre yarn, Spandex, CRF® Technology, Basalt fibre thread - Foam grip pattern - Withstands contact heat up to 100°C
Tegera 8810 Nitrile Foam-PU Palm Dipped Glove
- Cold insulation gloves.
- Synthetic glove, Nitrile foam/waterbased PU, Palm-dipped.
- Acrylic, Nylon, 10 gg, 15 gg, Spandex.
- Foam grip pattern, Fleece.
- Withstands contact heat up to 100°.
Tegera 8804 Nitrile Foam-PU Double Dipped Glove
- Synthetic glove.
- Nitrile, nitrile foam/waterbased PU, fully dipped, double-dipped, nylon, 18gg, Spandex.
- Foam grip pattern.
- Withstands contact heat up to 100°C.
- Oil and grease resistant, waterproof.
Tegera 7363 Full Lined Chemical Protec Glove Cut C
- EN388: 2016 level C cut resistance - Fully lined chemical protection glove (0,3 mm *chem-layer) - 18 gg, Glass fibre thread, Spandex, CRF® Technology - Sandy finish - Oil and grease resistant
Tegera 6615 Elasticated Leather Glove
- Medium weight full grain cowhide leather glove
- Unlined, 0,7-0,9 mm thickness
- Water and oil repellent
- Elasticated 180°
- For allround work, particularly slippery/oily environments
Tegera 296 Leather Thermal Protection Glove
- Winter-lined leather glove
- Windproof and waterproof for extra wearer warmth
- Elasticated 360° for more secure fit
- Thinsulate 150g lining for warmth
Tegera 19 Heat Res Fully Lined Welding Glove x1
- Cat III
- Fully lined 1.2 - 1.4mm glove
- Top quality split cowhide outer
- Reinforced seams for longevity
- 180° elastication for secure fit
- Withstands contact heat up to 100°C
Tegera 187 Nitrile Chemical Resist Glove
- Medium weight chemical protection glove
- Protects from oil and fat
- 0.38mm Nitrile diamond grip pattern
- Unflocked
- Latex free
Tegera 17 Heat Resistant Fully Lined Glove x1
- Cat II
- Fully lined 1.2 - 1.4mm glove
- Top quality split cowhide outer
- Reinforced seams for longevity
- 180° elastication for secure fit
- Withstands contact heat up to 100°C
Tegera 134 Heat Resist Kevlar Lined Welding Glove
- Cat III
- Fully lined 0.8 - 1.2mm glove
- Full grain goatskin
- Nomex®, KEVLAR® fiber
- Reinforced seams for longevity
- 180° elastication for secure fit
- Water and oil repellent
Tegera 118a Heat Resistant Unlined Welding Glove
- Cat. III
- Unlined 0.7 - 0.8mm glove
- Full grain goatskin, split cowhide
- Reinforced seams for longevity
- 180° elastication for secure fit
- Withstands welding sparks and grinding splash
TD04 Biodegradable Nitrile Disposable Gloves x100
- 79% Biodegradation in 735 days according to ASTM D5526.
- High stretch levels and excellent dexterity gives superior comfort for the wearer.
- Very close fitting which allows for intricate tasks and assembly of small parts.
- Textured glove surface vastly increases the grip and allows for greater control when handling objects.
TD02 Tri Polymer Blend Disposable Glove (x100)
- A sustainable solution to disposable gloves.
- The world''s first Carbon Neutral disposable glove.
- Traditional nitrile gloves can take over 100 years to biodegrade on landfills.
- TD02 biodegrades by an impressive 82% within 90 days.
- Industrial compostable.
- Changed the ingredients of traditional nitrile disposable gloves, which have a heavy carbon footprint, to a far lighter and more sustainable and measurable one.
- Many disposable gloves are made in China which is the world’s biggest greenhouse gas polluter and has a greater downstream shipping CO2e footprint for UK customers. TD02 is made in Sri Lanka where we use a high content of raw material sustainably produced locally within our supply chain, resulting in a lower carbon footprint within production.
- TD02 Sustain is a tri polymer disposable glove meaning only a small portion of the disposable glove is made up of nitrile, this means that the percentage of petrochemicals released into the atmosphere is significantly lower than that of a nitrile disposable glove. 85% less energy is used per tonne to process natural rubber compared to synthetic rubber (nitrile).
- Recyclable packaging.
Superior Rigger gloves
- White split leather B-Flex Rigger glove.
- Heavyweight blue cotton backing and safety cuff.
- Good fitting large size.
- Fleecy lined palm and thumb-face for added comfort.
Standard Tig Welders Gauntlet
- Great quality goat-hide gauntlet.
- Leather cuff for increased wrist protection.
- Twaron heat resistant thread for longevity of gauntlets.
- Chrome split leather on back of hand.
- Incredibly dexterous.
Standard Rigger Glove
- Standard split leather rigger.
- Stripped cotton back.
- Pasted cuff and leather knuckle strap.
- Economical style for a variety of low risk applications.
Standard Lined Red Welders Gauntlet
- High quality traditional red welders gauntlet.
- Minimum leather thickness of 1mm.
- Includes a cotton lining to the cuff, with a soft, comfortable lining.
- Partial welting to the seams and finger tips and self hemmed.
SONIC 200 powder free nitrile gloves (1x200)
- Quality nitrile examination gloves - increased tensile strength and protection over Latex and Vinyl.
- Incredible ultra-thin Nitrile for increased comfort, flexibility & sensitivity.
- 2.2mil Powder-free Nitrile, Latex free
- Non-Sterile, beaded cuff, ambidextrous
- AQL 1.5
SONIC 100 powder free nitrile gloves (1x100)
- Blue Nitrile examination gloves that offer increased tensile strength and protection over Latex and Vinyl.
- Specifically designed to offer increased comfort, flexibility & sensitivity. 2.2mil Powder-Free Nitrile - Non-Sterile, Beaded cuff, Ambidextrous, Latex Free, AQL 1.5
Soft Acrylic Fingerless Gloves
- Soft acrylic fingerless gloves combining warmth with extra dexterity.
- Seamless construction for comfort.
- Ideal glove for low temperature or outdoor work where maximum dexterity is required.
Smooth PU Palm Coated Seamless Liner Glove
- Smooth PU coating for increased abrasion resistance.
- Palm dipper to increase dexterity.
- 13 gauge lightweight liner glove.
- 100% breathable liner.
- Seamless construction for comfort.
- Superb abrasion and tear resistance.
- Available in Black or Grey.
Skytec Ohio Tough Flexible PVC Coated Glove
- With a water-repellent HPT foam coating, these Skytec work gloves offer outstanding grip, even in wet conditions.
- Their anatomical design provides great working comfort and allows excellent dexterity, great for handling all sorts of components in various industries.
- These grip gloves are also excellently hard-wearing, offering great resistance against abrasions and tearing.
Skytec Ninjalite PU Palm Ultra Lightweight Glove
- An ultra-lightweight glove, with exceptional flexibility and tactile touch for the most delicate of tasks.
- Superfine extra soft nylon liner.
- Sanitized® antimicrobial finish provides extra freshness.
- Breathable through front and back of the hand to reduce perspiration and skin irritation.
- Protects the hand from oils, grease and abrasion, with effective grip.
Skytec Neon Xtra Nitrile Full Coated W-proof Glove
- Cotton liner with a lightweight nitrile coating.
- Durable with an excellent grip.
- Warm and comfortable to wear.
- Anti-bacterial treatment to reduce odours.
- Seamless liner prevents wearer irritation.
- Knitted wrist for a improved secure fit.