Search
Hand Protection
Hands are the most vunerable part of your body.
They’re worth protecting properly.
Many workplace injuries and claims are due to improper hand protection. Choosing the right gloves is a very imprtant job. We offer gloves to protect you in hundres of different working environments. Not just run-of-the-mill gloves, we have a range of specialist gloves for very high risk and demanding applications. You can browse through our range below or ... why not take advantage of our free on-site glove survey? Let us take the risk off you and make your job easier. We assess all your site needs and recommend a selection of gloves for each department. You trial the gloves - let us know what you think and we go from there. This is followed up with staff training and support. Safe hands can save lives.
View as
Sort by
Display per page
Pre powdered vinyl gloves (1x100)
- The gloves are made from a very soft, thin vinyl which allows for good, tactile sensitivity for all applications.
- Beaded cuff, Ambidextrous, Glueless, Free of Thiurams
- Straight fingers, Non-Sterile
MaxiCut Oil Foam Nitrile Coated Glove Cut B
- EN388: 2016 level B cut resistance
- Combines cut protection with comfort, flexibility and dexterity for oily and wet environments
- Heavy duty thumb crotch reinforcement for additional protection
- 1,30mm palm thickness
- Also available 3/4 dipped: A14.34-305
Bold powder free nitrile gloves (1x100)
- Premium quality Black Nitrile examination gloves - greater tensile strength and protection than both Latex and Vinyl.
- Offers great comfort and flexibility.
- 5mil Powder-Free Nitrile, Latex Free
- Non-Sterile, Beaded cuff, Ambidextrous
Konig44 Heavy Duty 44cm Rubber Gauntlet
- Premium, extra thick heavyweight natural rubber gauntlet.
- Anatomic shape for comfort, flexibility and reduced fatigue.
- Chlorinated for low extractable proteins and residual chemicals.
- Rolled cuff for drip protection, increased stregth and donning and helps reduce roll down.
- Smooth, flock free inner
Latex Fully Coated Heavy Duty W-proof Glove Cut E
- EN388: 2016 - level E cut resistance - Textured latex palm offering increased protection, grip and durability - Constructed of a highly specialised mixture of fibres for ultra cut protection - Sanitized hygiene for freshness and odour repellents - Built for extended longevity
Transform 100 Powder Free Nitrile Glove Blue (100)
Excellent quality nitrile examination glove - increased tensile strength and protection over Latex and Vinyl. Thin nitrile for increased comfort, flexibility & sensitivity. 3.2mil Powder-Free Nitrile Non-Sterile Beaded cuff Ambidextrous Latex Free AQL 1.5
Tilsatec M-wt Foam Nitrile Palm Coated Glove Cut F
- Foam nitrile palm coated gloves
- 10 gauge medium weight liner
- Rhino Yarn cut resistance technology
- Breathable open back and coating
- Dark colour liner hides dirt
- Reinforced thumb crotch
Blue Fish Scale Nitrile Disposable Glove (1x50)
- Specifically for demanding environments with long cuff.
- Double sided “Fish scale” pattern - extra grip and durability.
- Made from a tough nitrile formulation, the PG-900 also boasts excellent tear resistance. Other features include an extended and beaded cuff that reduces particle transfer and prevents liquid rollback.
- AQL 4.0
- Chemical resistant, food approved.
- Contains no Latex, powder free.
- Ambidextrous
- Beaded cuff
Tilsatec L-wt Antimicrobial Glove Cut F (singles)
- EN388: 2016 level E cut resistance
- Permanent antimicrobial component
- 10 gauge lightweight gloves
- May be washed at up to 92°C
- Colour coded to prevent cross contamination
- Extended cuff for added protection
- Designed for knife hand use
- Suitable for vegetable preparation, food packaging, light duty meat carving
- Ambidextrous
22" Kevlar Aramid Sleeve w-Thumb Slot Cut C
- EN388: 2016 level C cut resistance - High tenacity aramid yarn combines high strength and cut resistance into a soft flexible yarn - Double layer construction of aramid for extra protection - Thumb slot cut helps locate the sleeve securely and increases protection to the palm area - The aramid fibre provides heat protection
Manosun Oil Res. Cut E 3-4 Coated Glove
- Excellent resistance to industrial oils and greases. - EN ISO 13997 TDM E glove with excellent abrasion resistance. - Excellent flexibility and dexterity minimizing hand fatigue. - The reinforcement greatly extends glove life to save your cost and provides extra protection in the weakest area. - Contact heat protection level 1 approved. - Anti-bacterial processed and OEKO-TEX 100 certified.
Manosun BL Cut E Nitrile Coated 13 Gauge Glove x12
- EN ISO 13997 TDM cut level E and ANSI cut level A6 certified. - 10-finger touchscreen compatibility enables you to use all touch screen devices on the job. - Advanced yarns technology contrbutes to high cut protection with extra softness and comfort. - Excellent resistance to oils and acids in dry and wet environments. - Super grip in both dry and oily working conditions. - Ideal for heavy duty work and critical cut/blade hazards. - Anti-bacterial processed and OEKO-TEX standard 100 certified.
Kutlass Foam Nitrile F-Coated W-proof Glove Cut D
- EN388: 2016 level D cut resistance - Fully dipped in a touch waterproof nitrile coating, with a further sandy nitrile porous foam oater coating for extra grip - Knitted from special blend of cut resistant fibres
Kutlass Foam Nitrile Fully Coated Cut 5 Gloves
A machine knitted grey liner made from innovative, highly cut resistant fibres blended with nylon and other synthetic yarns to give cut level 5 protection with added comfort and breathability.Black porous foam nitrile coating creates enhanced grip in dry, wet and oily situations for a highly versatile glove.Available in palm, knuckle and fully coated versions.
Tegera 8804 Nitrile Foam-PU Double Dipped Glove
- Synthetic glove.
- Nitrile, nitrile foam/waterbased PU, fully dipped, double-dipped, nylon, 18gg, Spandex.
- Foam grip pattern.
- Withstands contact heat up to 100°C.
- Oil and grease resistant, waterproof.
MaxiTherm Palm Coated Liner Glove
- Thermal lined glove for general handling in cold conditions Natural latex on a seamless synthetic liner with a patented non-slip grip coated.
- Latex coating gives excellent grip in wet or dry conditions Palm coating offers resistance from water and glove retains breathability on the back of the hand.
- Suitable for use in temperatures as low as -15°C
- Suitable for use with contact heat up to +250°C for 15 seconds
DELTAnocut+ Foam Nitrile Coated Glove Cut D
- EN388:2016 level D cut resistance - Nitrile micro-foam coating on palm and fingertips - Breathable and comfortable glove - 15 gauge lightweight gloves - Soft touch exposure for freshness - Ultra dexterous for reduced hand fatigue
Latex Palm Coated Heavy Duty Kevlar Glove Cut E
- EN388: 2016 level E cut resistance - Textured latex palm offering increased protection, grip and durability - Constructed of a highly specialised mixture of fibres for ultra cut protection - Sanitized hygiene for freshness and odour repellents - Built for extended longevity
Tilsatec M-wt PU Palm Coated Glove Cut F
- Dry PU palm coating provides secure grip
- 10 gauge medium weight liner
- Rhino Yarn cut resistance technology
- Dark colour liner hides dirt
- Reinforced thumb crotch
Tilsatec M-wt Latex Palm Coated Glove Cut F
- Crinkle latex palm coating delivers excellent dry and wet grip
- 10 gauge medium weight liner
- Breathable open back
- Rhino Yarn cut resistance technology
- Dark colour liner hides dirt
Tegera 17 Heat Resistant Fully Lined Glove x1
- Cat II
- Fully lined 1.2 - 1.4mm glove
- Top quality split cowhide outer
- Reinforced seams for longevity
- 180° elastication for secure fit
- Withstands contact heat up to 100°C
Mapa Harpon 321 Natural Latex Fishing Glove
- Comfort and safety when gripping heavy, rough or slippery objects in highly aggressive environments.
- Suitable for long-term wear, due to the comfort of a textile support and good thermal insulation.
- Optimised service life: high resistance to abrasion.
- 320mm length
MaxiDry Driver Fully Coated Gauntlet Cut A
- Lightweight liquid repellent glove with excellent dexterity.
- Double dipped to keep hands protected from oils and hydrocarbons.
- Micro-cup grip coating gives assured grip in wet & oily environments.
- Fully liquid repellent.
- Manufactured on a liner that’s thinner than a sheet of paper.
- Unbelievable flexibility & dexterity.
Tegera Nitrile Chemical Protection Glove
- Fully lined and dipped chemical protection nitrile glove
- 0,3* mm (*chem-layer) thickness
- Sandy finish palm, superb for resistance to oil/grease/water
- For allround work, suitable for harsh/corrosive/dirty environments
- Suitable for food handling – except for fatty foods
ProKut X5 Cut Level E Knit Liner Glove
Manufactured from best selling X5 yarn - a highly specialised mixture of high tenacity aramid fibre, stainless steel and other high performance fibres - provides outstanding cut resistance in a soft, comfortable glove. Reinforced thumb crotch provides additional protection durability in an inherently weak area. Tested for heat protection at EN407 contact heat level 1, this glove is ideal to use as a liner under other styles of gloves and gauntlets where heat and cut protection is required. Highly cut resistant plain knit liner High Cut Resistance Cut Level E Contact Heat Level 1 - Up to 100°C RTC technology offers additional protection Ideal for use as a liner
Heavy Weight Kevlar Aramid Fibre Glove Cut B
- EN388: 2016 level B cut resistance - High tenacity aramid yarn combines high tensile strength and cut resistance into a soft flexible yarn - Heavyweight machine knitted glove with an elasticated wrist made from 100% aramid yarn
Green Chemical 18" Unlined Nitrile Gauntlet
- Premium Green Chemical Resistant 18 inch Unlined Nitrile Gauntlet.
- Premium Extra Thick 0.58mm +/- 0.03mm Nitrile Gauntlet.
- Extra Long 45cm from finger to end of cuff.
- Unlined to remove risk of contamination and easy clean.
- Cut level 1.
- Proven durability against solvents, oil, fats and bleaching chemical agents.
Maxidex Fully Coated Glove
- Our proprietary technology platform ViroSan™, which resides on the glove coating is designed to prevent the proliferation of viruses which deposit on the glove.
- Our LIQUItech® technology platform provides a liquid proof barrier which in the case of MaxiDex, enables it to pass EN ISO 374-5, for viruses.
- Designed and developed to mimic the natural contours of the hand, to deliver outstanding flexibility, dexterity and tactile sensitivity.
- Unique ADAPT® technology keeps hands cool, dry & productive.
Premium Lined Blue Double Palm Welders Gauntlet
- Superior quality blue welders gauntlet with high quality split leather.
- Minimum leather thickness of 1mm.
- Includes a double thickness palm for extra protection and durability.
- Fully lined for extra heat insulation.
- Partial welting to the seams and finger tips and self hemmed.
Premium Lined Blue Welders Gauntlet
- Superior quality traditional blue welders gauntlet
- Minimum leather thickness of 1mm
- Fully lined for added heat insulation and comfort
- Reinforced thumb and crotch area
- Partial welting to the seams and finger tips and self hemmed
Standard Tig Welders Gauntlet
- Great quality goat-hide gauntlet.
- Leather cuff for increased wrist protection.
- Twaron heat resistant thread for longevity of gauntlets.
- Chrome split leather on back of hand.
- Incredibly dexterous.
Premium Gold Welders Gauntlet
- Premium quality reinforced gold welders gauntlet.
- Reinforced palm area for added durability.
- Inner lining for increased protection and wearer comfort.
- Kevlar stitched.
- Fully welted.
MaxiDry Fully Coated Knit-Wrist Waterproof Glove
- Lightweight liquid repellent glove with excellent dexterity.
- Double dipped to keep hands protected from oils and hydrocarbons.
- Micro-cup grip coating gives assured grip in wet & oily environments.
- Ideal for working in wet and oily environments.
- Extremely flexible and dexterous.
- Excellent abrasion resistance.
- 250mm length, 1.3mm thickness.
LXT Traffiglove TG1240 Red Cut A (pair)
- Certified to the new EN 388:2016 standard, cut level A
- High tenacity nylon liner – widely known for its tensile strength and cut resistance
- Palm-dipped MicroDex Ultra coating for further longevity and abrasion resistance
- Features a thumb crotch for additional protection and wear life
- Hot contact resistance up to 100°C (conforms to EN 407)
- LXT Treatment for water, oil and dirt resistance and reduced staining
- Dexterous, highly tactile, and breathable
- Works well in wet, dry and oily conditions and when in momentary contact with hot surfaces/component
- Carbon neutral
Showa 377 Nitrile Full Coated Liquid Proof Glove
- Full coated nitrile with a nitrile foam palm.
- A flexible, robust glove - great dexterity and tear resistance.
- Protects the hand from oils, hydrocarbons, grease and abrasion, with optimal long-lasting grip.
- Minimal allergy risks.
- Reinforced knit cuff, wrist well protected.
- No irritation by seams in contact with the skin.
Kutlass Ultra-PU2 Cut F x 1 Pair
The Kutlass® Ultra-PU provides our maximum protection in a coated glove being tested to level F on the new TDM cut test as part of EN388:2016. The liner encompasses a 4 yarn special blend wrapped around a stainless steel core and plaited on the inside of the glove to offer the user a smooth, cool feel throughout use. A hard wearing PU coating to the palm allows for added dexterity and good grip in dry, wet or oily applications. Generous cuff offers great protection to the wrist area. This glove is perfect for use in high cut risk applications.
Kutlass Foam Nitrile Palm Coated Cut D Gloves
A machine knitted grey liner made from innovative, highly cut resistant fibres blended with nylon and other synthetic yarns to give cut level 5 protection with added comfort and breathability. Black porous foam nitrile coating creates enhanced grip in dry, wet and oily situations for a highly versatile glove. Available in palm, knuckle and fully coated versions.
Premium Tig Welders Gauntlet
- Premium tig welders gauntlet made from high quality goat leather.
- Reinforced with a golden cow split leather cuff for superb wrist protection.
- High tenacity aramid fibre stitching throughout for longevity.
AHR 10 Food Liner Glove Cut F (Single)
Food safe glove designed to achieve maximum Cut Level F protection. 10 gauge liner provides exceptional durability. Low linting construction prevents food contamination. Sold as a single glove. Tested for 20 washes at temperatures up to 92°C. Ambidextrous to fit right or left handed users.
IceTherm Fully Insulated HPT Coated Thermal Glove
- Tough tear resistant nylon outer and coated in a flexible HPT grip coating.
- Designed to stay flexible in extreme cold.
- Brushed acrylic terry loop inner allows for outstanding thermal insulation and comfort.
Cut Resistant Sleeves 22" Changing to A14.SL-HANT
This cut level D protective sleeve offers cut and heat resistance for the wrist and arm. There is a thumb hole for to ensure the sleave is secure and comfortable. It is machine washable and is sold singly.
ATG Maxidry Gloves
- The MaxiDry Palm-Coated Oil-Resistant Gloves 56-424 are designed to protect users from risks associated with oily environments.
- They are lightweight and flexible for optimal dexterity, and have textured nitrile coating on their palms which ensures users can keep a secure grip on tools and materials.
- They also have a very high level of abrasion resistance for protection against rough surfaces and scratches.
Standard Lined Red Welders Gauntlet
- High quality traditional red welders gauntlet.
- Minimum leather thickness of 1mm.
- Includes a cotton lining to the cuff, with a soft, comfortable lining.
- Partial welting to the seams and finger tips and self hemmed.
Jersette natural latex gloves
- Natural latex.
- Wrist scalloped cuff.
- Seamless textile support.
- Good tear-resistance.
- Good resistance to many diluted acids and bases.
Pred Baltic Watersafe Thermal Lined Glove
- 15 Gauge Polyester outer liner with a 7 gauge acrylic loop inner liner
- Waterproof - double dipped
- Fully coated in Smooth Latex, finished with Sandy Latex palm dip
- Tested against contact cold
- Elasticated cuff with coloured cuff size indicator
Powder Free Latex x 100 (Natural)
- Keep your hands safe with the Natural Powder Free Latex Gloves. Crafted from latex, these gloves provide optimal protection and barrier strength. And with its powder-free feature, you can count on an easy and comfortable fit. Get the perfect balance of protection and comfort with this product.
- Chlorinated Powder-Free Latex.
- Super thin but super strong glove- Skin like feel
- Suitable for Medical use- Dentists, Doctors, Vets.
- Suitable for food preparation.
- Non-Sterile.
- Beaded cuff.
- Ambidextrous.
- AQL 1.5.
Mapa UltraNeo 420 Flock Lined Neoprene Gauntlet
- Neoprene and natural latex material, embossed exterior.
- Extremely supple with freedom of movement for standard chemical protection, due to the supple quality of the neoprene and the comfort of the cotton flock-lining.
- Good grip, due to embossed texture.
- 310mm length
- 0.75mm thickness
Perfect Poly Skin Light-wt PU Palm Coated Glove
- Grey PU palm coating
- Lightweight 18 gauge glove
- Fine handling in a dry, lightly greasy or dirty environment
- Excellent dexterity and breathability
- Ventilated back and ultra-light coating
- Offers added sturdiness to wearer
- Silicone free