Search
Cut Protection Gloves
View as
Sort by
Display per page
Rig Dog™ Waterproof High Impact Glove Cut F
- ISO level F cut resistance, enhanced oil grip, dry/wet grip, and level 4 abrasion resistance
- CoreNest™ technology: reinforced TPR composite material with honeycomb structure to enhance energy absorption on back of hand for providing improved impact protection on knuckles
- Elevated finger-tip protection for enhanced protection from hammering
- Minimum stitching on palm for low oil permeability, providing comfort and durability
- Integrated, water-resistant membrane to keep hands dry in wet applications
- Quick dry, moisture wicking fabric
- Reinforced thumb-crotch protection and durability
- Impact protection is notched to allow for great flexibility and dexterity
Rig Dog™ Xtreme High Impact Glove Cut F
- EN388: 2016 Level F cut resistance.
- CoreNest™ technology:reinforced TPR composite material with honeycomb structure, enhances the energy absorption feature on back of hand for providing improved impact protection on knuckles.
- Elevated finger-tip protection for providing enhanced impact protection.
- Impact protection is notched to allow for great flexibility and Dexterity.
- Low oil permeability through palm for comfort and long-lasting experience.
- Enhanced oil grip, dry/wet grip, and level 4 abrasion resistance.
- Quick dry moisture wicking fabric.
- Reinforced thumb-crotch.
- Available with winter lining for cold environments (A14.2332904).
MaxiCut Oil Nitrile Coated LP Glove Cut D
- EN388: 2003 Level D cut resistance
- Leather palm for enhanced grip in oily environments
- High abrasion resistance for long life
- Reinforced thumb crotch for extended life
- 2,60mm palm thickness
Mapa KroTech Shock Protect Cushioned Glove Cut D
- EN388: 2016 level D cut resistance - Shock protection, cushioning protection on upper thumb, knuckles, base fingers and palm - Liquid resistant long last coating - Durable, long lasting grease and oilproof palm coating
Tegera 987 Nitrile Palm Dipped Long Glove Cut F
- EN388: 2016 level F cut resistance - Nitrile, Palm-dipped - Acrylic, 7 gg, Stainless steel fibre yarn, Spandex - Sandy finish - Water and oil repellent palm - Withstands contact heat up to 250°C - Extra long, for heavy work
Mapa KryTech Durable Foam Nitrile Glove Cut C
- EN388: 2016 level C cut resistance - Nitrile foam palm coated glove - High durability for increase life, cost savings and productivity - Silicone and DMF free, using Oeko-tex - Anatomical shape: close fit for precision - Durable for extra longevity
MaxiCut Dry Foam Nitrile Coated Glove Cut C
- EN388: 2016 level C cut resistance,
- Airtech 360° breathability
- Microcup finish allows for optimised grip
- 1,30 palm thickness
- 25cm length glove
Tilsatec 8" Wristguard c-w straps Cut F (pair)
- Rhino Yarn cut resistant technology
- Protects the wrist and lower arm
- Adjustable sizing for accurate fit and wearer comfort
- Dark colour hides dirt
- Will not mark glass panels
Tegera 8814 Nitrile Foam-PU Palm Coat Glove Cut F
- EN388: 2016 level F cut resistance - Nitrile foam/waterbased PU, Palm-dipped - 13 gg, Stainless steel fibre yarn, Spandex, CRF® Technology, Basalt fibre thread - Foam grip pattern - Withstands contact heat up to 100°C
CoreShield™ 10 G, Thin Nitrile Coat Glove Cut A9-F
- EN388 level F cut resistance
- 10 gauge nylon black liner, nitrile black thin coating
- One of the lightest cut-protective gloves in the market, helps prevent hand fatigue
- 360° breathability, excellent grip performance, abrasion resistance, excellent dexterity. and longer cuff for wrist protection
- Thumb reinforcement
- Touchscreen resistive and capacitive
MaxiCut Oil Foam Nitrile Coated Glove Cut C
- EN388: 2016 Level C cut resistance - Combines cut protection with comfort, flexibility and dexterity for oily and wet environments - 1,60mm palm thickness - Also available 3/4 dipped: A14.34-505
Mapa KryTech Durable Foam Nitrile Gove Cut B
- EN388: 2016 level B cut resistance - Nitrile foam palm coated glove - High durability for increased life, cost savings and productivity - Silicone and DMF free, using Oeko-tex - Anatomical shape: close fit for precision - Durable for extra longevity
MaxiCut Oil Foam Nitrile Coated LPalm Glove Cut C
- EN388: 2003 level C cut resistance
- Leather palm for enhanced grip in oily environments
- High abrasion resistance for long life
- Reinforced thumb crotch for extended life
- 2,50mm palm thickness
MaxiCut Ultra Foam Nitrile Coated Glove Cut C
EN388: 2016 level C cut resistance, Class leading fit and feel reducing hand fatigue, Microcup finish allows for optimised grip, 1,000 palm thickness, Also available dotted: A14.44-3446
Tilsatec M-wt FR Backed Leather Glove Cut E
- 7 gauge medium duty gloves.
- Rhino Yarn cut resistant technology.
- Level 3 puncture resistance.
- Leather palm provides oil resistance and good grip.
- Flame resistant fabric provides protection from weld spatter to the back of the hand.
Tilsatec L-wt FR Backed Leather Palm Glove Cut F
- 13 gauge lightweight gloves
- Lightweight shell provides excellent dexterity and flexibility
- Leather palm provides oil resistance and grip
- Flame resistant fabric provides protection from weld spatter to the back of the hand
- Leather wrist tab provides extended protection and quick pull on action
Tegera 7363 Full Lined Chemical Protec Glove Cut C
- EN388: 2016 level C cut resistance - Fully lined chemical protection glove (0,3 mm *chem-layer) - 18 gg, Glass fibre thread, Spandex, CRF® Technology - Sandy finish - Oil and grease resistant
CoreShield™ 13 G, Foam Nitrile Coat Glove Cut A7-F
- EN388 level F cut resistance
- 13 gauge nylon black liner, nitrile micro-foam black coating
- One of the lightest cut-protective gloves in the market, helps prevent hand fatigue
- 360° breathability, excellent grip performance, abrasion resistance, excellent dexterity. and longer cuff for wrist protection
- Thumb reinforcement
- Touchscreen resistive and capacitive
CoreShield™ 13 G, Foam Nitrile Coat Glove Cut A6-F
- EN388 level F cut resistance
- 13 gauge nylon black liner, nitrile micro-foam black coating
- One of the lightest cut-protective gloves in the market, helps prevent hand fatigue
- 360° breathability, excellent grip performance, abrasion resistance, excellent dexterity. and longer cuff for wrist protection
- Thumb reinforcement
- Touchscreen resistive and capacitive
Tilsatec L-wt Full Coated Foam Nitrile Glove Cut E
- EN388: 2016 level E cut resistance
- Flat nitrile full dip provides oil repellency and liquid protection keeping the hands dry and comfortable
- 15 gauge form-fitting, lightweight liner
- Rhino Yarn cut resistant technology
- High level of tactility and dexterity
- EN388: 2016 - 3X43E
CoreShield™ 18 G, Foam Nitrile Coat Glove Cut A4-D
- EN388 level C cut resistance
- 18 gauge nylon black liner, nitrile micro-foam black coating
- One of the lightest cut-protective gloves in the market, helps prevent hand fatigue
- 360° breathability, excellent grip performance, abrasion resistance, excellent dexterity. and longer cuff for wrist protection
- Thumb reinforcement
- Touchscreen resistive and capacitive
CoreShield™ 18 G, Foam Nitrile Coat Glove Cut A3-C
- EN388 level C cut resistance
- 18 gauge nylon black liner, nitrile micro-foam black coating
- One of the lightest cut-protective gloves in the market, helps prevent hand fatigue
- 360° breathability, excellent grip performance, abrasion resistance, excellent dexterity. and longer cuff for wrist protection
- Thumb reinforcement
- Touchscreen resistive and capacitive
CoreShield™ 13 G, Foam Nitrile Coat Glove Cut A5-E
- EN388 level E cut resistance
- 13 gauge nylon black liner, nitrile micro-foam black coating
- One of the lightest cut-protective gloves in the market, helps prevent hand fatigue
- 360° breathability, excellent grip performance, abrasion resistance, excellent dexterity. and longer cuff for wrist protection
- Thumb reinforcement
- Touchscreen resistive and capacitive
DELTAnocut+ Double Coated Nitrile Glove Cut D
- EN388: 2016 level D cut resistance - Double nitrile coating to work with oil, smooth nitrile, with a second foam nitrile coating for extra grip - 13 gauge lightweight gloves - Increased protection of fingers - Extra coating for extra joint strength
Tilsatec L-wt Foam Nitrile Palm Coated Glove Cut E
- EN388: 2016 level E cut resistance
- New micropore nitrile palm delivers good dry and oil grip
- 15 gauge form-fitting, lightweight liner
- Rhino Yarn cut resistant technology
- High level of tactility and dexterity
- Breathable liner and palm coating
- EN388: 2016 - 3X43E EN1149-5: 2018
Tilsatec Ultra-L-wt Foam Nitrile Palm Glove Cut D
- EN388: 2016 level D cut resistance
- Foam nitrile flex palm delivers good dry and oil grip
- Ultra fine 18 gauge lightweight liner
- Rhino Yarn cut resistance technology
- Extremely high level of fingertip sensitivity and tactility
MaxiCut Dry Foam Nitrile Coated Glove Cut B
- EN388: 2016 level B cut resistance - Airtech 360° breathability - Microcup finish allows for optimised grip - Mimics the ''hands at rest'' reducing hand fatigue - 1,00mm palm thickness
Pred Pacific Full Coated W-proof Latex Glove Cut C
- EN388: 2016 level C cut resistance.
- Fully coated smooth latex coated with a sandy latex palm finish.
- Seamless polyester and Azura liner.
- 13 gauge lightweight glove.
- Waterproof double dipped glove.
- Elasticated cuff to better fit.
- Extremely lightweight and dexterous.
MaxiFlex Cut Foam Nitrile Coated Glove Cut B
One of the thinnest most breathable gloves on the market offering cut protection 3. Thin foamed nitrile palm coated offering high levels of dexterity and durability. Reinforced between the thumb and forefinger. Sanitised for hygiene and freshness.
Tilsatec L-wt PU Palm Coated Glove Cut E
- These lightweight cut protection gloves are form-fitting for comfort and dexterity. Made from Rhino Yarn™ cut resistant technology with a polyurethane palm coating, these gloves deliver Level 5 cut protection suitable for a wide range of industries.
- Robust and durable palm coating for a high-quality product
- Excellent grip in both wet and dry conditions
- Seam-free construction eliminates skin irritation during prolonged use
- Dark colouring hides dirt to extending the life of the product
Medium Weight Kevlar Aramid Fibre Glove Cut B
- EN388: 2016 level B cut resistance - High tenacity aramid yarn combines high tensile strength and cut resistance into a soft flexible yarn - This medium weight machine knitted glove with an elasticated wrist made from 100% aramid yarn
DeltaPlus Venicut F Xtreme Cut Glove
Xtreme CUT high performance fibre. Foam nitrile and TPU coating on palm and fingertips. Gauge 18. Support: Xtrem CUT fibres. Coating: nitrile/ TPU foam.
MaxiCut Oil Foam Nitrile Coated Glove Cut B
- EN388: 2016 level B cut resistance
- Combines cut protection with comfort, flexibility and dexterity for oily and wet environments
- Heavy duty thumb crotch reinforcement for additional protection
- 1,30mm palm thickness
- Also available 3/4 dipped: A14.34-305
Latex Fully Coated Heavy Duty W-proof Glove Cut E
- EN388: 2016 - level E cut resistance - Textured latex palm offering increased protection, grip and durability - Constructed of a highly specialised mixture of fibres for ultra cut protection - Sanitized hygiene for freshness and odour repellents - Built for extended longevity
Tilsatec M-wt Foam Nitrile Palm Coated Glove Cut F
- Foam nitrile palm coated gloves
- 10 gauge medium weight liner
- Rhino Yarn cut resistance technology
- Breathable open back and coating
- Dark colour liner hides dirt
- Reinforced thumb crotch
22" Kevlar Aramid Sleeve w-Thumb Slot Cut C
- EN388: 2016 level C cut resistance - High tenacity aramid yarn combines high strength and cut resistance into a soft flexible yarn - Double layer construction of aramid for extra protection - Thumb slot cut helps locate the sleeve securely and increases protection to the palm area - The aramid fibre provides heat protection
Manosun Oil Res. Cut E 3-4 Coated Glove
- Excellent resistance to industrial oils and greases. - EN ISO 13997 TDM E glove with excellent abrasion resistance. - Excellent flexibility and dexterity minimizing hand fatigue. - The reinforcement greatly extends glove life to save your cost and provides extra protection in the weakest area. - Contact heat protection level 1 approved. - Anti-bacterial processed and OEKO-TEX 100 certified.
Kutlass Foam Nitrile F-Coated W-proof Glove Cut D
- EN388: 2016 level D cut resistance - Fully dipped in a touch waterproof nitrile coating, with a further sandy nitrile porous foam oater coating for extra grip - Knitted from special blend of cut resistant fibres
DELTAnocut+ Foam Nitrile Coated Glove Cut D
- EN388:2016 level D cut resistance - Nitrile micro-foam coating on palm and fingertips - Breathable and comfortable glove - 15 gauge lightweight gloves - Soft touch exposure for freshness - Ultra dexterous for reduced hand fatigue
Latex Palm Coated Heavy Duty Kevlar Glove Cut E
- EN388: 2016 level E cut resistance - Textured latex palm offering increased protection, grip and durability - Constructed of a highly specialised mixture of fibres for ultra cut protection - Sanitized hygiene for freshness and odour repellents - Built for extended longevity
Tilsatec M-wt PU Palm Coated Glove Cut F
- Dry PU palm coating provides secure grip
- 10 gauge medium weight liner
- Rhino Yarn cut resistance technology
- Dark colour liner hides dirt
- Reinforced thumb crotch
Tilsatec M-wt Latex Palm Coated Glove Cut F
- Crinkle latex palm coating delivers excellent dry and wet grip
- 10 gauge medium weight liner
- Breathable open back
- Rhino Yarn cut resistance technology
- Dark colour liner hides dirt
ProKut X5 Cut Level E Knit Liner Glove
Manufactured from best selling X5 yarn - a highly specialised mixture of high tenacity aramid fibre, stainless steel and other high performance fibres - provides outstanding cut resistance in a soft, comfortable glove. Reinforced thumb crotch provides additional protection durability in an inherently weak area. Tested for heat protection at EN407 contact heat level 1, this glove is ideal to use as a liner under other styles of gloves and gauntlets where heat and cut protection is required. Highly cut resistant plain knit liner High Cut Resistance Cut Level E Contact Heat Level 1 - Up to 100°C RTC technology offers additional protection Ideal for use as a liner
Heavy Weight Kevlar Aramid Fibre Glove Cut B
- EN388: 2016 level B cut resistance - High tenacity aramid yarn combines high tensile strength and cut resistance into a soft flexible yarn - Heavyweight machine knitted glove with an elasticated wrist made from 100% aramid yarn
Kutlass Ultra-PU2 Cut F x 1 Pair
The Kutlass® Ultra-PU provides our maximum protection in a coated glove being tested to level F on the new TDM cut test as part of EN388:2016. The liner encompasses a 4 yarn special blend wrapped around a stainless steel core and plaited on the inside of the glove to offer the user a smooth, cool feel throughout use. A hard wearing PU coating to the palm allows for added dexterity and good grip in dry, wet or oily applications. Generous cuff offers great protection to the wrist area. This glove is perfect for use in high cut risk applications.
Kutlass Foam Nitrile Palm Coated Cut D Gloves
A machine knitted grey liner made from innovative, highly cut resistant fibres blended with nylon and other synthetic yarns to give cut level 5 protection with added comfort and breathability. Black porous foam nitrile coating creates enhanced grip in dry, wet and oily situations for a highly versatile glove. Available in palm, knuckle and fully coated versions.
Cut Resistant Sleeves 22" Changing to A14.SL-HANT
This cut level D protective sleeve offers cut and heat resistance for the wrist and arm. There is a thumb hole for to ensure the sleave is secure and comfortable. It is machine washable and is sold singly.
- 1
- 2